ASSI N R2DS
kharezga·PCB·RT12e_ASSI_N_R2DS/ASSI_N_R2DS/ASSI_N_R2DS.kicad_pcb
About the ASSI N R2DS PCB
ASSI N R2DS is an open source STM32 PCB design by kharezga, published on GitHub. It is a 2-layer board measuring 68.6 × 50.8 mm, with 55 components from 31 distinct parts.
Its main chip is the STM32F042K6Tx, from the STM32 family. Other key parts include the IC_CAN-TRANSCEIVER_TLE7250XSJ-Racing_symbols, TPS62160QDSGRQ1, 74LV1T04GW-Q100H, TPA2008D2PWPR and AP7313-33SRG-7. By type, the board carries 22 capacitors, 10 resistors, 7 ICs, 6 connectors, 5 inductors and 3 diodes.
From the project
The TSAL should be mounted on the rear of the vehicle and must be clearly visible from the rear of the vehicle during both day and night conditions. The light should be red or yellow and must flash at a frequency between 1Hz and 4Hz.
The TSAL should be mounted on the rear of the vehicle and must be clearly visible from the rear of the vehicle during both day and night conditions. The light should be red or yellow and must flash at a frequency between 1Hz and 4Hz.
During normal operation, the TSAL should remain on steadily to indicate that the tractive system is active. When the vehicle is in an emergency or shutdown state, the TSAL should flash at a higher frequency between 4Hz and 10Hz to indicate that the tractive system is inactive.
Main components on the ASSI N R2DS
ASSI N R2DS bill of materials (BOM)
55 components, 31 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | IC_CAN-TRANSCEIVER_TLE7250XSJ-Racing_symbols | SOIC-8_3.9x4.9mm_P1.27mm | IC1 |
| 1 | TPS62160QDSGRQ1 | SON50P200X200X80-9N | IC2 |
| 2 | 74LV1T04GW-Q100H | SOT65P212X110-5N | IC3, IC4 |
| 1 | TPA2008D2PWPR | SOP65P640X120-25N | IC5 |
| 1 | STM32F042K6Tx | LQFP-32_7x7mm_P0.8mm | U1 |
| 1 | AP7313-33SRG-7 | SOT-223-3_TabPin2 | U2 |
| 1 | CAN | JST_JWPF_B04B-JWPF-SK-R_1x04_P2.00mm_Vertical | J1 |
| 1 | OUT_LED1 | JST_JWPF_B04B-JWPF-SK-R_1x04_P2.00mm_Vertical | J2 |
| 1 | OUT_LED2 | JST_JWPF_B04B-JWPF-SK-R_1x04_P2.00mm_Vertical | J3 |
| 1 | OUT_LED3 | JST_JWPF_B04B-JWPF-SK-R_1x04_P2.00mm_Vertical | J4 |
| 1 | OUT_SPEAKER | JST_JWPF_B04B-JWPF-SK-R_1x04_P2.00mm_Vertical | J5 |
| 1 | SWD | PinSocket_2x03_P2.00mm_Vertical | J6 |
| 2 | Jumper | PinHeader_1x02_P1.00mm_Vertical | JP1, JP2 |
| 1 | NUP2105L | SOT-23 | D1 |
| 2 | LED | LED_0603_1608Metric | D2, D3 |
| 1 | 2.2uH | L_0603_1608Metric | L1 |
| 4 | 33uH | L_0603_1608Metric | L2, L3, L4, L5 |
| 10 | 100nF | C_0603_1608Metric | C1, C2, C3, C4, C5, C6, C13, C14 +2 |
| 1 | 10nF | C_0603_1608Metric | C7 |
| 1 | 22nF | C_0603_1608Metric | C8 |
Show 11 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 6 | 1uF | C_0603_1608Metric | C9, C10, C17, C20, C21, C22 |
| 2 | 0.47uF | C_0603_1608Metric | C11, C12 |
| 1 | 220pF | C_0603_1608Metric | C18 |
| 1 | 10uF | C_0603_1608Metric | C19 |
| 1 | 100 | R_0603_1608Metric | R1 |
| 3 | 10k | R_0603_1608Metric | R2, R3, R4 |
| 1 | 100k | R_0603_1608Metric | R5 |
| 1 | 680k | R_0603_1608Metric | R6 |
| 1 | 130k | R_0603_1608Metric | R7 |
| 2 | 1k | R_0603_1608Metric | R8, R9 |
| 1 | 120K | R_0603_1608Metric | R11 |
ASSI N R2DS design files
The KiCad project lives in the kharezga/PCB repository on GitHub; these links point at the commit this page was built from.
ASSI N R2DS: common questions
What microcontroller does the ASSI N R2DS use?
The ASSI N R2DS is built around the STM32F042K6Tx, from the STM32 family.
How big is the ASSI N R2DS PCB?
The ASSI N R2DS measures 68.6 × 50.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ASSI N R2DS?
55 components, from 31 distinct parts. The full bill of materials is listed on this page.
Where can I download the ASSI N R2DS design files?
From the kharezga/PCB repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the ASSI N R2DS design in my own project?
The repository has no license, so all rights stay with kharezga. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the ASSI N R2DS without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in PCB
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k