RT12 TSAL 00
kharezga·PCB·RT12e_TSAL/RT12e_ELE_TSAL-00/RT12_TSAL_00.kicad_pcb
About the RT12 TSAL 00 PCB
RT12 TSAL 00 is an open source PCB design by kharezga, published on GitHub. It is a 2-layer board measuring 52.6 × 35.6 mm, with 55 components from 36 distinct parts.
Other key parts include the 74HCT4075D,653, 74HC1G04GV-Q100H_INV, 74LV1T08GVH_AND, LT1720CS8#PBF and ZSR500GTA. By type, the board carries 20 resistors, 10 ICs, 10 capacitors, 6 connectors, 5 diodes and 4 transistors.
From the project
The TSAL should be mounted on the rear of the vehicle and must be clearly visible from the rear of the vehicle during both day and night conditions. The light should be red or yellow and must flash at a frequency between 1Hz and 4Hz.
The TSAL should be mounted on the rear of the vehicle and must be clearly visible from the rear of the vehicle during both day and night conditions. The light should be red or yellow and must flash at a frequency between 1Hz and 4Hz.
During normal operation, the TSAL should remain on steadily to indicate that the tractive system is active. When the vehicle is in an emergency or shutdown state, the TSAL should flash at a higher frequency between 4Hz and 10Hz to indicate that the tractive system is inactive.
Main components on the RT12 TSAL 00
RT12 TSAL 00 bill of materials (BOM)
55 components, 36 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 74HCT4075D,653 | SOIC127P600X175-14N | IC1 |
| 2 | 74HC1G04GV-Q100H_INV | SOT95P275X110-5N | IC2, IC4 |
| 3 | 74LV1T08GVH_AND | SOT95P275X110-5N | IC3, IC5, IC8 |
| 2 | LT1720CS8#PBF | SOIC127P599X175-8N | IC6, IC7 |
| 1 | ZSR500GTA | SOT230P700X180-4N | IC9 |
| 1 | NE555 | NE555DR | U1 |
| 3 | BSS123 | SOT-23 | Q1, Q2, Q3 |
| 1 | BSS84 | SOT-23 | Q4 |
| 1 | LVS | PinHeader_1x02_P2.00mm_Vertical | J1 |
| 1 | AIR1 | PinHeader_1x02_P2.00mm_Vertical | J2 |
| 1 | AIR2 | PinHeader_1x02_P2.00mm_Vertical | J3 |
| 1 | AIR_PRE | PinHeader_1x02_P2.00mm_Vertical | J4 |
| 1 | BATT_n_INV | PinHeader_1x02_P2.00mm_Vertical | J5 |
| 1 | INDICATOR_LED | Molex_SPOX_5267-04A_1x04_P2.50mm_Vertical | J6 |
| 1 | 0.2V | D_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1 |
| 1 | 0.2 | D_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D2 |
| 1 | D_LED_0603_GREEN_20mA | D_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D3 |
| 1 | D_LED_0603_RED_20mA | D_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D4 |
| 1 | VCC | LED_0603_1608Metric | D5 |
| 2 | CC_0603_10nF_14V | C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C1, C2 |
Show 16 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | CC_0603_10nF_14V | C_0603_1608Metric | C3, C4 |
| 2 | CC_0603_100nF_14V | C_0603_1608Metric | C5, C6 |
| 1 | CC_0603_1uF_14V | C_0603_1608Metric | C7 |
| 3 | 100n | C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C8, C9, C10 |
| 1 | R_0603_1K_5% | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1 |
| 1 | R_0805_2320_1% | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R2 |
| 2 | R_0805_575_1% | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R3, R4 |
| 5 | R_0603_100_1% | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R5, R6, R7, R11, R12 |
| 2 | R_0603_100_1% | R_0603_1608Metric | R8, R9 |
| 1 | R_0603_10K_1% | R_0603_1608Metric | R10 |
| 1 | R_0603_10K_1% | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R13 |
| 2 | R_0603_2K2_5% | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R14, R20 |
| 2 | R_0603_22K_5% | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R15, R16 |
| 1 | R_0603_47_5% | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R17 |
| 1 | R_0603_220K_5% | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R18 |
| 1 | R_0603_10K_5% | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R19 |
RT12 TSAL 00 design files
The KiCad project lives in the kharezga/PCB repository on GitHub; these links point at the commit this page was built from.
RT12 TSAL 00: common questions
How big is the RT12 TSAL 00 PCB?
The RT12 TSAL 00 measures 52.6 × 35.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the RT12 TSAL 00?
55 components, from 36 distinct parts. The full bill of materials is listed on this page.
Where can I download the RT12 TSAL 00 design files?
From the kharezga/PCB repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the RT12 TSAL 00 design in my own project?
The repository has no license, so all rights stay with kharezga. Use it as a reference, and ask the author before reusing the design.