20 open source boards using the STM32F042K6TX
Real designs built with the STM32F042K6TX, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
FOME Open Source Wideband O2 Module
mck1117
29 × 20.9 mm59 parts4LMIT76STM32
Wideband controller
jlwinland
29 × 20.9 mm59 parts4LUnlicense3STM32
SkateLightMainBoard
dannyandreev
45 × 63.8 mm68 parts4LAGPL-3.02STM32
Relacon-HW
fjenner
85.7 × 54 mm48 parts2LNo license2STM32
ASSI N R2DS
kharezga
68.6 × 50.8 mm55 parts2LNo license1STM32
Monitor
zincVTD
62 × 35.4 mm48 parts2LNo license1STM32
Fome mc
halbritt
162 × 115 mm462 parts4LNo license0STM32
Wideband controller
FDSoftware
29 × 20.9 mm59 parts4LMIT0STM32
Wideband controller
JRDMcLAREN
29 × 20.9 mm59 parts4LMIT0STM32
OpenRow
set321go
51 × 60 mm55 parts2LMIT0STM32
Odsci
sthivaios
50 × 70 mm31 parts4LCERN-OHL-S-2.00STM32
WBO
andreika-git
24.6 × 14 mm63 parts4LNo license36STM32
Dual board carrier
jlwinland
63 × 36.6 mm26 parts2LUnlicense3STM32
TPMS
zincVTD
62 × 47.2 mm47 parts2LNo license1STM32
Dual board carrier 90
jlwinland
55 × 45 mm26 parts2LUnlicense3STM32
Feeder Testplatine
Tynogc
40 × 64 mm48 parts2LGPL-3.01STM32
RT12e ELE ACC-00
kharezga
31 × 20 mm32 parts2LNo license1STM32
Sensor v2-board
AREA-Amiens
55.3 × 46 mm47 parts2LNo license0STM32
Brushless board
robotronik
60 × 62.5 mm57 parts2LNo license1STM32
Brushless board
robotronik
60 × 62.5 mm57 parts2LNo license1
How designs wire the STM32F042K6TX
Read from the KiCad layouts of 16 open source designs, one per repository: what each pin of the STM32F042K6TX connects to, and the resistors, capacitors and other passives placed on it.
- The VDD pin has a decoupling capacitor on 15 of 16 designs, most often 100 nF (then 4.7 µF).
- The VDDA pin has a decoupling capacitor on 14 of 15 designs, most often 100 nF (then 1 µF).
- The VDDIO2 pin has a decoupling capacitor on 14 of 15 designs, most often 100 nF (then 4.7 µF).
- The NRST pin has a capacitor to GND on 13 of 15 designs, most often 100 nF (then 1 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VDDpin 1 | Connected to: 3.3V 94% |
|
| NRSTpin 4 | Connected to: A connector 60% |
|
| VDDApin 5 | Connected to: 3.3V 100% |
|
| PA0pin 6 | Connected to: MCP6004 33%, a connector 20% · not connected 33% |
|
| PA1pin 7 | Connected to: A connector 47% · not connected 33% |
|
| PA2pin 8 | Connected to: A connector 27% · not connected 20% |
|
| PA3pin 9 | Connected to: MCP6004 33%, a connector 27% · not connected 27% |
|
| PA4pin 10 | Connected to: Not connected 60% · a signal 40% | — |
| PA5pin 11 | Connected to: Not connected 67% · a signal 33% | — |
| PA6pin 12 | Connected to: A connector 27% · not connected 20% |
|
| PA7pin 13 | Connected to: Signal 87% |
|
| VSSpin 16 | Connected to: GND 100% | — |
| VDDIO2pin 17 | Connected to: 3.3V 100% |
|
| PB7pin 30 | Connected to: Signal 67% · not connected 33% |
|
| PB8pin 31 | Connected to: A connector 40% |
|
| VSSApin 32 | Connected to: GND 100% | — |
16 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include FOME Open Source Wideband O2 Module by mck1117, WBO by andreika-git, Dual board carrier by jlwinland and SkateLightMainBoard by dannyandreev.
The STM32F042K6TX in open source designs
The gallery holds 20 open source boards using the STM32F042K6TX from 16 GitHub repositories; a typical one measures about 53 × 46.6 mm and carries around 55 components.
60% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.
The most starred is FOME Open Source Wideband O2 Module by mck1117.
Parts used alongside the STM32F042K6TX
Microcontrollers on boards using the STM32F042K6TX
What boards using the STM32F042K6TX are built for
STM32F042K6TX: common questions
Where can I find a STM32F042K6TX reference design?
Each of the 20 boards on this page is a real design using the STM32F042K6TX. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the STM32F042K6TX VDD pin?
The VDD pin has a decoupling capacitor on 15 of 16 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 16 open source designs using the STM32F042K6TX.
What decoupling capacitors do designs use on the STM32F042K6TX VDDA pin?
The VDDA pin has a decoupling capacitor on 14 of 15 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 16 open source designs using the STM32F042K6TX.
What decoupling capacitors do designs use on the STM32F042K6TX VDDIO2 pin?
The VDDIO2 pin has a decoupling capacitor on 14 of 15 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 16 open source designs using the STM32F042K6TX.
What parts are used alongside the STM32F042K6TX?
The AD8628, MCP6004, REF3033, XC6206P332MR and USBLC6-2 appear in the most repositories here.
Which microcontrollers do boards using the STM32F042K6TX use?
Most are built on STM32 (20).
How big is a typical board using the STM32F042K6TX?
The median is 53 × 46.6 mm, and 60% are two-layer designs.
What is the most popular open source board using the STM32F042K6TX?
By GitHub stars, FOME Open Source Wideband O2 Module by mck1117, with 76 stars.
Can I simulate one of these boards using the STM32F042K6TX before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.