IGrillRPiSSRCtl rev sB
About the IGrillRPiSSRCtl rev sB PCB
IGrillRPiSSRCtl rev sB is an open source PCB design by kins-dev, published on GitHub under the MIT license. It is a 2-layer board measuring 65 × 56 mm, with 6 components from 5 distinct parts.
By type, the board carries 2 diodes, 2 resistors, 1 connector and 1 buzzer.
From the project
Using the iGrill as a control unit for a DIY smoker
🔴 Note: You are 100% responsible for ensuring safe food practices are followed.
🔴 Check and modify temperatures as appropriate
- Problem Statement - Design - Equipment - Requirements - Installation - Software Setup - Using iGrill Mini - Grill Setup - Running - Lighttpd Setup - Project Notes - iGrill Smoker Board Rev. A - A Board - A Notes - A Parts - iGrill Smoker Board Rev. B - B Board - B Notes - B Parts - iGrill Smoker Board Rev. C - C Board - C Notes - C Parts - iGrill Smoker Board Rev. D - D Notes - D Parts - iGrill Smoker Board Rev. E - E Notes - E Parts
IGrillRPiSSRCtl rev sB bill of materials (BOM)
6 components, 5 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Conn_02x20_Odd_Even | PinSocket_2x20_P2.54mm_Vertical | P1 |
| 1 | Buzzer | Buzzer_TDK_PS1240P02BT_D12.2mm_H6.5mm | BZ1 |
| 1 | Low Battery | LED_D5.0mm | D1 |
| 1 | Cooking Complete | LED_D5.0mm_Clear | D2 |
| 2 | 100 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2 |
IGrillRPiSSRCtl rev sB design files
The KiCad project lives in the kins-dev/igrill-smoker repository on GitHub; these links point at the commit this page was built from.
IGrillRPiSSRCtl rev sB: common questions
How big is the IGrillRPiSSRCtl rev sB PCB?
The IGrillRPiSSRCtl rev sB measures 65 × 56 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the IGrillRPiSSRCtl rev sB?
6 components, from 5 distinct parts. The full bill of materials is listed on this page.
Where can I download the IGrillRPiSSRCtl rev sB design files?
From the kins-dev/igrill-smoker repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the IGrillRPiSSRCtl rev sB design in my own project?
Yes, under the terms of its MIT license, which kins-dev chose for the repository.
