IGrillRPiSSRCtl rev sE
About the IGrillRPiSSRCtl rev sE PCB
IGrillRPiSSRCtl rev sE is an open source PCB design by kins-dev, published on GitHub under the MIT license. It is a 2-layer board measuring 65 × 56 mm, with 46 components from 15 distinct parts.
By type, the board carries 26 resistors, 9 transistors, 7 diodes, 2 connectors, 1 buzzer and 1 switch.
From the project
Using the iGrill as a control unit for a DIY smoker
🔴 Note: You are 100% responsible for ensuring safe food practices are followed.
🔴 Check and modify temperatures as appropriate
- Problem Statement - Design - Equipment - Requirements - Installation - Software Setup - Using iGrill Mini - Grill Setup - Running - Lighttpd Setup - Project Notes - iGrill Smoker Board Rev. A - A Board - A Notes - A Parts - iGrill Smoker Board Rev. B - B Board - B Notes - B Parts - iGrill Smoker Board Rev. C - C Board - C Notes - C Parts - iGrill Smoker Board Rev. D - D Notes - D Parts - iGrill Smoker Board Rev. E - E Notes - E Parts
IGrillRPiSSRCtl rev sE bill of materials (BOM)
46 components, 15 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 9 | MMBT3904LT1G | SOT-23 | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8 +1 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J1 |
| 1 | Conn_02x20_Odd_Even | PinSocket_2x20_P2.54mm_Vertical | P1 |
| 1 | Buzzer | Buzzer_TDK_PS1240P02BT_D12.2mm_H6.5mm | BZ1 |
| 1 | SW_SPDT | SW_Slide_1P2T_CK_OS102011MS2Q | SW1 |
| 1 | Low Battery | LED_0603_1608Metric | D1 |
| 1 | Smoking Complete | LED_0603_1608Metric | D2 |
| 1 | Cold | LED_0603_1608Metric | D3 |
| 1 | Cool | LED_0603_1608Metric | D4 |
| 1 | Perfect | LED_0603_1608Metric | D5 |
| 1 | Warm | LED_0603_1608Metric | D6 |
| 1 | Hot | LED_0603_1608Metric | D7 |
| 7 | 180Ω | R_0603_1608Metric | R1, R3, R5, R7, R9, R12, R14 |
| 10 | 1kΩ | R_0603_1608Metric | R2, R4, R6, R8, R10, R11, R13, R15 +2 |
| 9 | 10kΩ | R_0603_1608Metric | R18, R19, R20, R21, R22, R23, R24, R25 +1 |
IGrillRPiSSRCtl rev sE design files
The KiCad project lives in the kins-dev/igrill-smoker repository on GitHub; these links point at the commit this page was built from.
IGrillRPiSSRCtl rev sE: common questions
How big is the IGrillRPiSSRCtl rev sE PCB?
The IGrillRPiSSRCtl rev sE measures 65 × 56 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the IGrillRPiSSRCtl rev sE?
46 components, from 15 distinct parts. The full bill of materials is listed on this page.
Where can I download the IGrillRPiSSRCtl rev sE design files?
From the kins-dev/igrill-smoker repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the IGrillRPiSSRCtl rev sE design in my own project?
Yes, under the terms of its MIT license, which kins-dev chose for the repository.
