IngestibleCapsule-Board larger vias
kjpeng·ingestible-capsule·IngestibleCapsule-Board_larger_vias/IngestibleCapsule-Board_larger_vias.kicad_pcb
About the IngestibleCapsule-Board larger vias
IngestibleCapsule-Board larger vias is an open source STM32 PCB design by kjpeng, published on GitHub. It is a 2-layer board measuring 15 × 15 mm, with 51 components from 27 distinct parts.
Its main chip is the STM32G473CCUx, from the STM32 family. Other key parts include the MLX90640, ADXL343, W25Q16JVSS and SR1010. By type, the board carries 24 capacitors, 12 resistors, 5 ICs, 5 connectors, 3 crystals and 1 diode.
Main components on the IngestibleCapsule-Board larger vias
IngestibleCapsule-Board larger vias bill of materials (BOM)
51 components, 27 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32G473CCUx | QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mm | U1 |
| 1 | MLX90640 | MLX90640 | U2 |
| 1 | ADXL343 | LGA-14_3x5mm_P0.8mm_LayoutBorder1x6y | U3 |
| 1 | W25Q16JVSS | SOIC-8_5.3x5.3mm_P1.27mm | U4 |
| 1 | SR1010 | QFN-28-1EP_4x4mm_P0.4mm_EP2.7x2.7mm | U5 |
| 1 | ABM3 | ABM3-48.000MHZ-B2-T | Y1 |
| 2 | ABS07 | ABS07-120-32.768KHZ-T | Y2, Y3 |
| 1 | AXF6K0412A | AXF6K0412A | J2 |
| 1 | AXF5K0412A | AXF5K0412A | J3 |
| 1 | 513389873 | CON_513389873 | J4 |
| 1 | 559099872 | CON_559099872 | J5 |
| 1 | Conn_01x02_Pin | BM02BSRSSTBLFSN | J6 |
| 1 | LED | LED_0402_1005Metric | D1 |
| 1 | 180n | L_0402_1005Metric | L1 |
| 2 | 16p | C_0402_1005Metric | C1, C2 |
| 2 | 2p | C_0402_1005Metric | C3, C4 |
| 10 | 100n | C_0402_1005Metric | C5, C6, C7, C8, C11, C12, C13, C14 +2 |
| 4 | 1u | C_0402_1005Metric | C9, C18, C19, C20 |
| 2 | 10u | C_0603_1608Metric | C10, C24 |
| 2 | 10p | C_0402_1005Metric | C15, C16 |
Show 7 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 680p | C_0402_1005Metric | C22 |
| 1 | 68p | C_0402_1005Metric | C23 |
| 2 | 390R | R_0402_1005Metric | R1, R4 |
| 6 | 10k | R_0402_1005Metric | R2, R5, R6, R7, R8, R9 |
| 1 | 0R | R_0402_1005Metric | R3 |
| 2 | 390k | R_0402_1005Metric | R10, R12 |
| 1 | 2M2 | R_0603_1608Metric | R11 |
IngestibleCapsule-Board larger vias design files
The KiCad project lives in the kjpeng/ingestible-capsule repository on GitHub; these links point at the commit this page was built from.
IngestibleCapsule-Board larger vias: common questions
What microcontroller does the IngestibleCapsule-Board larger vias use?
The IngestibleCapsule-Board larger vias is built around the STM32G473CCUx, from the STM32 family.
How big is the IngestibleCapsule-Board larger vias?
The IngestibleCapsule-Board larger vias measures 15 × 15 mm, has 2 copper layers and is 0.82 mm thick.
How many components are on the IngestibleCapsule-Board larger vias?
51 components, from 27 distinct parts. The full bill of materials is listed on this page.
Where can I download the IngestibleCapsule-Board larger vias design files?
From the kjpeng/ingestible-capsule repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the IngestibleCapsule-Board larger vias design in my own project?
The repository has no license, so all rights stay with kjpeng. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the IngestibleCapsule-Board larger vias without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in ingestible-capsule
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k