IngestibleCapsule-Board whole
About the IngestibleCapsule-Board whole
IngestibleCapsule-Board whole is an open source STM32 PCB design by kjpeng, published on GitHub. It is a 2-layer board measuring 37.4 × 54.2 mm, with 47 components from 24 distinct parts.
Its main chip is the STM32G473CCUx, from the STM32 family. Other key parts include the MLX90640, ADXL343, W25Q16JVSS and SR1010. By type, the board carries 23 capacitors, 12 resistors, 5 ICs, 3 crystals, 1 connector and 1 antenna.
Main components on the IngestibleCapsule-Board whole
IngestibleCapsule-Board whole bill of materials (BOM)
47 components, 24 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32G473CCUx | QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mm | U1 |
| 1 | MLX90640 | MLX90640 | U2 |
| 1 | ADXL343 | LGA-14_3x5mm_P0.8mm_LayoutBorder1x6y | U3 |
| 1 | W25Q16JVSS | SOIC-8_5.3x5.3mm_P1.27mm | U4 |
| 1 | SR1010 | QFN-28-1EP_4x4mm_P0.4mm_EP2.7x2.7mm | U5 |
| 1 | ABM3 | ABM3-48.000MHZ-B2-T | Y1 |
| 2 | ABS07 | ABS07-120-32.768KHZ-T | Y2, Y3 |
| 1 | Conn_01x02_Pin | PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | Antenna_Dipole | Dipole Antenna | AE1 |
| 1 | LED | LED_0402_1005Metric | D1 |
| 1 | 180n | L_0402_1005Metric | L1 |
| 10 | 100n | C_0402_1005Metric | C1, C2, C3, C4, C5, C12, C13, C14 +2 |
| 4 | 1u | C_0402_1005Metric | C6, C15, C16, C17 |
| 1 | 10u | C_0603_1608Metric | C7 |
| 2 | 16p | C_0402_1005Metric | C8, C9 |
| 2 | 2p | C_0402_1005Metric | C10, C11 |
| 2 | 10p | C_0402_1005Metric | C20, C21 |
| 1 | 680p | C_0402_1005Metric | C22 |
| 1 | 68p | C_0402_1005Metric | C23 |
| 1 | 0R | R_0402_1005Metric | R1 |
Show 4 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 6 | 10k | R_0402_1005Metric | R2, R5, R6, R7, R8, R9 |
| 2 | 390R | R_0402_1005Metric | R3, R4 |
| 2 | 390k | R_0402_1005Metric | R10, R12 |
| 1 | 2M2 | R_0603_1608Metric | R11 |
IngestibleCapsule-Board whole design files
The KiCad project lives in the kjpeng/ingestible-capsule repository on GitHub; these links point at the commit this page was built from.
IngestibleCapsule-Board whole: common questions
What microcontroller does the IngestibleCapsule-Board whole use?
The IngestibleCapsule-Board whole is built around the STM32G473CCUx, from the STM32 family.
How big is the IngestibleCapsule-Board whole?
The IngestibleCapsule-Board whole measures 37.4 × 54.2 mm, has 2 copper layers and is 0.82 mm thick.
How many components are on the IngestibleCapsule-Board whole?
47 components, from 24 distinct parts. The full bill of materials is listed on this page.
Where can I download the IngestibleCapsule-Board whole design files?
From the kjpeng/ingestible-capsule repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the IngestibleCapsule-Board whole design in my own project?
The repository has no license, so all rights stay with kjpeng. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the IngestibleCapsule-Board whole without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in ingestible-capsule
Similar boards
STM32LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7k
STM32AxxSolder
AxxAxx
39 × 82.5 mm122 parts2LGPL-3.01.7k
STM32LibreVNA
jankae
122 × 98 mm592 parts6LGPL-3.01.6k
STM32AIOC
skuep
21 × 31.5 mm47 parts2LMIT1.4k
STM32Ferris
pierrechevalier83
208.8 × 86.8 mm102 parts2LSHL-2.11.3k
STM32176 pin board
rusefi
61.8 × 73.2 mm76 parts2LGPL-3.01.2k