18 open source boards using the ADXL343

Real designs built with the ADXL343, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

18 boardsClear filters|Most starred

How designs wire the ADXL343

Read from the KiCad layouts of 13 open source designs, one per repository: what each pin of the ADXL343 connects to, and the resistors, capacitors and other passives placed on it.

  • The VDD_I/O pin has a decoupling capacitor on 10 of 13 designs, most often 100 nF (then 10 µF).
  • The VS pin has a decoupling capacitor on 10 of 13 designs, most often 100 nF (then 1 µF).
  • The RES pins is left unconnected on 69% of them (GND on 5, 3.3V on 3).
VDD_I/Opin 1Connected to: 3.3V 77% · a signal 23%
  • Decoupling capacitor on 77% · 100 nF (12), 10 µF (3), 1 µF (3)
GNDpin 2, 4, 5Connected to: GND 85% · a signal 15%
RESpin 3, 11Connected to: Not connected 69% · GND 19%
VSpin 6Connected to: 3.3V 69% · a signal 31%
  • Decoupling capacitor on 77% · 100 nF (12), 1 µF (3), 10 µF (2)
CSpin 7Connected to: The microcontroller 31% · 3.3V 38%
  • Capacitor to GND on 38% · 100 nF (7), 10 µF (1), 1 µF (1)
NCpin 10Connected to: Not connected 100%
SDA/SDI/SDIOpin 13Connected to: The microcontroller 77%, a connector 31%
  • Pull-up to 3.3V on 38% · 10 kΩ (3), 4.7 kΩ (2)
SCL/SCLKpin 14Connected to: The microcontroller 77%, a connector 31%
  • Pull-up to 3.3V on 38% · 10 kΩ (3), 4.7 kΩ (2)

3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Main by wgbowley, Robot by sidstuff, ADXL343-Eval-Board by fatihdedeic and 2425 ESE Projet V-NOM by MohamedBenabdelhadi.

The ADXL343 in open source designs

The gallery holds 18 open source boards using the ADXL343 from 14 GitHub repositories; a typical one measures about 55.5 × 53.6 mm and carries around 59 components.

67% are two-layer designs, the rest use four layers or more, and 17% carry an open source license.

The most starred is Main by wgbowley.

Microcontrollers on boards using the ADXL343

ADXL343: common questions

Where can I find a ADXL343 reference design?

Each of the 18 boards on this page is a real design using the ADXL343. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the ADXL343 VDD_I/O pin?

The VDD_I/O pin has a decoupling capacitor on 10 of 13 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 13 open source designs using the ADXL343.

What decoupling capacitors do designs use on the ADXL343 VS pin?

The VS pin has a decoupling capacitor on 10 of 13 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 13 open source designs using the ADXL343.

How is the ADXL343 RES pin connected?

The RES pins is left unconnected on 69% of them (GND on 5, 3.3V on 3). Counted from the KiCad layouts of 13 open source designs using the ADXL343.

What parts are used alongside the ADXL343?

The CH340C, ESP32-S3-WROOM-1, STM32G431CBU6 and ZXBM5210-SP appear in the most repositories here.

Which microcontrollers do boards using the ADXL343 use?

Most are built on STM32 (8), ESP32 (5), Silicon Labs (2) and NXP (1).

How big is a typical board using the ADXL343?

The median is 55.5 × 53.6 mm, and 67% are two-layer designs.

What is the most popular open source board using the ADXL343?

By GitHub stars, Main by wgbowley, with 10 stars.

Can I simulate one of these boards using the ADXL343 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part