CHRISTMAS RISC V
kkuznetzov·CHRISTMAS_RISC_V·HARDWARE/CHRISTMAS_RISC_V/CHRISTMAS_RISC_V.kicad_pcb
About the CHRISTMAS RISC V PCB
CHRISTMAS RISC V is an open source RISC-V PCB design by kkuznetzov, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 96.5 × 73.4 mm, with 50 components from 9 distinct parts.
Its main chip is the CH32V003F4P6, from the RISC-V family. By type, the board carries 23 capacitors, 19 LEDs and 4 resistors.
From the project
Christmas tree decoration
CHRISTMAS RISC V bill of materials (BOM)
50 components, 9 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CH32V003F4P6 | TSSOP-20_4.4x6.5mm_P0.65mm | DD1 |
| 1 | BZV55-B5V6 | D_MiniMELF | VD1 |
| 1 | B2B-XH-A(LF)(SN) | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | XP1 |
| 1 | PLS2-4 | PinHeader_1x04_P2.00mm_Vertical | XP2 |
| 19 | WS2812B | LED_WS2812B-Mini_PLCC4_3.5x3.5mm | VD2, VD3, VD4, VD5, VD6, VD7, VD8, VD9 +11 |
| 22 | 0.1uF, 50V, X7R, 0603 | C_0603_1608Metric | C1, C2, C3, C4, C5, C6, C7, C8 +14 |
| 1 | 1uF, 25V, X5R, 0603 | C_0603_1608Metric | C23 |
| 1 | 10K, 1%, 0603 | R_0603_1608Metric | R1 |
| 3 | 27, 5%, 0603 | R_0603_1608Metric | R2, R3, R4 |
CHRISTMAS RISC V design files
The KiCad project lives in the kkuznetzov/CHRISTMAS_RISC_V repository on GitHub; these links point at the commit this page was built from.
CHRISTMAS RISC V: common questions
What microcontroller does the CHRISTMAS RISC V use?
The CHRISTMAS RISC V is built around the CH32V003F4P6, from the RISC-V family.
How big is the CHRISTMAS RISC V PCB?
The CHRISTMAS RISC V measures 96.5 × 73.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the CHRISTMAS RISC V?
50 components, from 9 distinct parts. The full bill of materials is listed on this page.
Where can I download the CHRISTMAS RISC V design files?
From the kkuznetzov/CHRISTMAS_RISC_V repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the CHRISTMAS RISC V design in my own project?
Yes, under the terms of its GPL-3.0 license, which kkuznetzov chose for the repository.
Can I test firmware for the CHRISTMAS RISC V without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RISC-V firmware against it before you order a PCB.
Similar boards
RISC-V
Audio
byrantech
27.8 × 22.3 mm38 parts2LMIT4.3kRISC-V
Keybit
notaroomba
19.1 × 19.1 mm19 parts2LNo license438RISC-V
Workbench-1 Controller
Quchaosheng
160 × 130 mm106 parts8LApache-2.0212RISC-V
Froggyswadge
cnlohr
81.5 × 72.2 mm92 parts2LMIT105RISC-V
Keytartouch
cnlohr
152.5 × 117.5 mm69 parts2LMIT105RISC-V
Ch32v003f4u6 with wsled
cnlohr
40.6 × 44.5 mm26 parts2LMIT105