HardLabs

Pcb arcade encoder

klein0r·pcb-arcade-encoder

Pcb arcade encoder layout, top view — open source AVR/Arduino board by klein0r
Simulate this board

About the Pcb arcade encoder

Pcb arcade encoder is an open source AVR/Arduino PCB design by klein0r, published on GitHub under the MIT license. It is a 2-layer board measuring 56.6 × 38.7 mm, with 3 components from 3 distinct parts.

Its main chip is the ProMicro, from the AVR/Arduino family. By type, the board carries 2 connectors and 1 IC.

From the project

A small pcb to use your Arduino Pro Micro as an USB-Controller adapter

- Arduino Pro Micro 5V - D-SUB ST 09EU - D-SUB ST 15EU

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

Pcb arcade encoder, from the project README
From the project README

Main components on the Pcb arcade encoder

ProMicro

Pcb arcade encoder bill of materials (BOM)

3 components, 3 distinct parts.

QtyPartRefs
1
ProMicro
U1
1
DB15_Male
J1
1
DB9_Male
J2

Pcb arcade encoder design files

The KiCad project lives in the klein0r/pcb-arcade-encoder repository on GitHub; these links point at the commit this page was built from.

Pcb arcade encoder: common questions

What microcontroller does the Pcb arcade encoder use?

The Pcb arcade encoder is built around the ProMicro, from the AVR/Arduino family.

How big is the Pcb arcade encoder?

The Pcb arcade encoder measures 56.6 × 38.7 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Pcb arcade encoder?

3 components, from 3 distinct parts. The full bill of materials is listed on this page.

Where can I download the Pcb arcade encoder design files?

From the klein0r/pcb-arcade-encoder repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Pcb arcade encoder design in my own project?

Yes, under the terms of its MIT license, which klein0r chose for the repository.

Can I test firmware for the Pcb arcade encoder without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards