HardLabs

Pcb knx busankoppler

klein0r·pcb-knx-busankoppler

Pcb knx busankoppler layout, top view — open source AVR/Arduino board by klein0r
Simulate this board

About the Pcb knx busankoppler

Pcb knx busankoppler is an open source AVR/Arduino PCB design by klein0r, published on GitHub under the MIT license. It is a 2-layer board measuring 42.2 × 37.3 mm, with 3 components from 3 distinct parts.

Its main chip is the ProMicro, from the AVR/Arduino family. By type, the board carries 2 connectors and 1 IC.

It belongs with the iot & wireless designs in this gallery.

From the project

PCB for 5WG1117-2AB12

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

Pcb knx busankoppler, from the project README
From the project README

Main components on the Pcb knx busankoppler

ProMicro

Pcb knx busankoppler bill of materials (BOM)

3 components, 3 distinct parts.

QtyPartRefs
1
ProMicro
U1
1
Conn_01x10_Male
J1
1
Conn_01x04_Male
J2

Pcb knx busankoppler design files

The KiCad project lives in the klein0r/pcb-knx-busankoppler repository on GitHub; these links point at the commit this page was built from.

Pcb knx busankoppler: common questions

What microcontroller does the Pcb knx busankoppler use?

The Pcb knx busankoppler is built around the ProMicro, from the AVR/Arduino family.

How big is the Pcb knx busankoppler?

The Pcb knx busankoppler measures 42.2 × 37.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Pcb knx busankoppler?

3 components, from 3 distinct parts. The full bill of materials is listed on this page.

Where can I download the Pcb knx busankoppler design files?

From the klein0r/pcb-knx-busankoppler repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Pcb knx busankoppler design in my own project?

Yes, under the terms of its MIT license, which klein0r chose for the repository.

Can I test firmware for the Pcb knx busankoppler without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards