Orangecrab pmod breakout
kleinreact·orangecrab-pmod-breakout
About the Orangecrab pmod breakout
Orangecrab pmod breakout is an open source PCB design by kleinreact, published on GitHub under the CERN-OHL-P-2.0 license. It is a 2-layer board measuring 68.3 × 72.1 mm, with 12 components from 11 distinct parts.
By type, the board carries 10 connectors and 2 jumpers.
It belongs with the dev boards & breakouts and usb & debug tools designs in this gallery.
From the project
OrangeCrab Pmod Breakout Board
This repository contains KiCad PCB designs for a breakout board extension to comfortably connect an OrangeCrab FPGA Development Board with an Adafuit FT232H JTAG programmer and some Pmod peripherals.
I originally created this board for me personally to gather some first experience with the OrangeCrab board. However, the board also quickly found some use cases in my professional work on the Clash Formal project at QBayLogic, which I very much appreciated. As a small devotion, you also can find the logos of the company and the of project on the board.

Orangecrab pmod breakout bill of materials (BOM)
12 components, 11 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | OC_LEFT | PinSocket_1x16_P2.54mm_Vertical | J1 |
| 1 | CONN_JTAG | PinSocket_1x05_P2.54mm_Horizontal | J2 |
| 1 | OC_JTAG | PinSocket_1x05_P2.54mm_Vertical | J3 |
| 1 | OC_RIGHT | PinSocket_1x12_P2.54mm_Vertical | J4 |
| 1 | PMOD_1 | PinSocket_1x06_P2.54mm_Horizontal | J5 |
| 1 | Conn_Pwr | PinSocket_1x07_P2.54mm_Horizontal | J6 |
| 1 | FT232H_LEFT | PinSocket_1x11_P2.54mm_Vertical | J7 |
| 1 | PMOD_3 | PinSocket_2x06_P2.54mm_Horizontal | J8 |
| 1 | FT232H_RIGHT | PinSocket_1x11_P2.54mm_Vertical | J9 |
| 1 | PMOD_2 | PinSocket_2x06_P2.54mm_Horizontal | J10 |
| 2 | Jumper_3_Open | PinHeader_1x03_P2.54mm_Horizontal | JP1, JP2 |
Orangecrab pmod breakout design files
The KiCad project lives in the kleinreact/orangecrab-pmod-breakout repository on GitHub; these links point at the commit this page was built from.
Orangecrab pmod breakout: common questions
How big is the Orangecrab pmod breakout?
The Orangecrab pmod breakout measures 68.3 × 72.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Orangecrab pmod breakout?
12 components, from 11 distinct parts. The full bill of materials is listed on this page.
Where can I download the Orangecrab pmod breakout design files?
From the kleinreact/orangecrab-pmod-breakout repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Orangecrab pmod breakout design in my own project?
Yes, under the terms of its CERN-OHL-P-2.0 license, which kleinreact chose for the repository.
Similar boards
Breakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kRj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979