Brage telemetry

klownfish·brage_telemetry·hardware/1280_modem.kicad_pcb

Brage telemetry PCB layout, top view — open source STM32 board by klownfish

About the Brage telemetry PCB

Brage telemetry is an open source STM32 PCB design by klownfish, published on GitHub. It is a 4-layer board measuring 38 × 53 mm, with 86 components from 38 distinct parts.

Its main chip is the STM32U575CGTX, from the STM32 family. Other key parts include the SX1281IMLTRT, SKY65383-11, LMR50410YQDBVRQ1, TPS7A20285PDBVR and USBLC6-2SC6. By type, the board carries 35 capacitors, 21 resistors, 7 ICs, 7 diodes, 5 connectors and 3 inductors.

It belongs with the rf & radio designs in this gallery.

From the project

A CAN connected 1W 2.4GHz telemetry modem

Brage telemetry, from the project README
From the project README

Main components on the Brage telemetry

SX1281IMLTRTSKY65383-11LMR50410YQDBVRQ1STM32U575CGTXTPS7A20285PDBVRUSBLC6-2SC6TCAN334GDCN

Brage telemetry bill of materials (BOM)

86 components, 38 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
SX1281IMLTRT
IC1
1
SKY65383-11
IC2
1
LMR50410YQDBVRQ1
LMR50410Y3
IC3
1
STM32U575CGTX
STM32U575CGTx
U1
1
TPS7A20285PDBVR
U2
1
USBLC6-2SC6
U3
1
TCAN334GDCN
U4
2
DMP3056L-7
Q1, Q2
1
48MHZ
48MHz
Y1
1
52MHZ
52MHz
Y2
1
jst_sh 6
J1
1
Conn_Coaxial
J2
1
USB_C_RECEPTACLE_USB2.0
USB_C_Receptacle_USB2.0
J3
1
jst gh 4
J4
1
jst gh 6
J5
1
inverted F
AE1
1
DEA202450BT-1261A2
DEA202450BT-1213C1
FL1
1
SOLDERJUMPER_2_OPEN
SolderJumper_2_Open
JP1
1
NTCG203NH103JT1
TH1
1
tx
D1
Show 18 more
QtyPartRefs
1
rx
D2
4
SZNUP2105L
D3, D5, D6, D7
1
IN-S128TATRGB
D9
2
BLM18KG102SN1D
FB1, FB3
1
4.7U
4.7u
L1
5
4U7
4u7
C1, C2, C4, C13, C14
7
18P
18p
C3, C5, C15, C16, C17, C21, C22
2
10N
10n
C6, C9
8
1u
C7, C11, C12, C23, C27, C31, C35, C36
9
100N
100n
C8, C10, C18, C19, C20, C24, C25, C29 +1
2
10U
10u
C26, C30
2
TBD
C32, C33
6
10K
10k
R1, R2, R3, R6, R13, R14
2
0
R4, R7
5
1M
R5, R8, R15, R16, R17
2
5K1
5k1
R9, R10
5
330
R11, R12, R19, R20, R21
1
120
R18

Brage telemetry design files

The KiCad project lives in the klownfish/brage_telemetry repository on GitHub; these links point at the commit this page was built from.

Brage telemetry: common questions

What microcontroller does the Brage telemetry use?

The Brage telemetry is built around the STM32U575CGTX, from the STM32 family.

How big is the Brage telemetry PCB?

The Brage telemetry measures 38 × 53 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Brage telemetry?

86 components, from 38 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Brage telemetry design files?

From the klownfish/brage_telemetry repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Brage telemetry design in my own project?

The repository has no license, so all rights stay with klownfish. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Brage telemetry without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards