13 open source boards using the SX1281IMLTRT

Real designs built with the SX1281IMLTRT, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

13 boardsClear filters|Most starred

How designs wire the SX1281IMLTRT

Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the SX1281IMLTRT connects to, and the resistors, capacitors and other passives placed on it.

  • The VR_PA_1 pin has a capacitor to GND on 8 of 8 designs, most often 10 nF.
  • The VDD_IN_2 pin has a capacitor to GND on 8 of 8 designs, most often 10 nF (then 470 nF).
  • The VBAT_IO_11 pin has a decoupling capacitor on 8 of 8 designs, most often 100 nF (then 10 µF).
  • The DCC_FB_12 pin has a capacitor to GND on 8 of 8 designs, most often 10 nF (then 470 nF).
VR_PA_1pin 1Connected to: Signal 100%
  • Capacitor to GND on 100% · 10 nF (9)
VDD_IN_2pin 2Connected to: Signal 100%
  • Capacitor to GND on 100% · 10 nF (9), 470 nF (8), 1 µF (1)
  • Inductor on 75% · 15 µH (7)
NRESET_3pin 3Connected to: The microcontroller 88%
  • Pull-up to 3.3V on 63% · 10 kΩ (6)
XTA_4pin 4Connected to: Signal 100%
  • Series capacitor on 63% · 1 nF (6)
  • Crystal on 38% · 52 MHz (2), 27.12 MHz (1)
GND_5pin 5Connected to: Not connected 63% · GND 38%
XTB_6pin 6Connected to: Not connected 63% · a signal 38%
  • Crystal on 38% · 52 MHz (2), 27.12 MHz (1)
DIO2_9pin 9Connected to: Not connected 88%
DIO3_10pin 10Connected to: Not connected 88%
VBAT_IO_11pin 11Connected to: 3.3V 100%
  • Decoupling capacitor on 100% · 100 nF (24), 10 µF (4), 1 µF (1)
  • Inductor on 63% · 2 nH (5)
DCC_FB_12pin 12Connected to: Signal 100%
  • Capacitor to GND on 100% · 10 nF (9), 470 nF (8), 1 µF (1)
  • Inductor on 75% · 15 µH (7)
GND_13pin 13Connected to: GND 100%
DCC_SW_14pin 14Connected to: Signal 75% · not connected 25%
  • Inductor on 75% · 15 µH (7), 10 µH (2)
VBAT_15pin 15Connected to: 3.3V 100%
  • Decoupling capacitor on 88% · 100 nF (25), 10 µF (4), 1 µF (1)
  • Inductor on 63% · 2 nH (5)
GND_20pin 20Connected to: GND 100%
GND_21pin 21Connected to: GND 100%
GND_23pin 23Connected to: GND 100%
GND_24pin 24Connected to: GND 100%
EP_25pin 25Connected to: GND 100%

7 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include [LSM6]Merlyn435 by YeetTheAnson, OpenRX-Lite by OpenDrone-hw, ENIAC by parsa-novin and OpenRX-Lite-UFL by OpenDrone-hw.

The SX1281IMLTRT in open source designs

The gallery holds 13 open source boards using the SX1281IMLTRT from 8 GitHub repositories; a typical one measures about 21.8 × 13.9 mm and carries around 68 components.

92% use four copper layers or more, and 46% carry an open source license.

The most starred is Merlyn435 by YeetTheAnson.

Parts used alongside the SX1281IMLTRT

Microcontrollers on boards using the SX1281IMLTRT

SX1281IMLTRT: common questions

Where can I find a SX1281IMLTRT reference design?

Each of the 13 boards on this page is a real design using the SX1281IMLTRT. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the SX1281IMLTRT VR_PA_1 pin connected?

The VR_PA_1 pin has a capacitor to GND on 8 of 8 designs, most often 10 nF. Counted from the KiCad layouts of 8 open source designs using the SX1281IMLTRT.

How is the SX1281IMLTRT VDD_IN_2 pin connected?

The VDD_IN_2 pin has a capacitor to GND on 8 of 8 designs, most often 10 nF (then 470 nF). Counted from the KiCad layouts of 8 open source designs using the SX1281IMLTRT.

What decoupling capacitors do designs use on the SX1281IMLTRT VBAT_IO_11 pin?

The VBAT_IO_11 pin has a decoupling capacitor on 8 of 8 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 8 open source designs using the SX1281IMLTRT.

What parts are used alongside the SX1281IMLTRT?

The TLV75533PDQNR, ESP32-C3FH4 and ESP32-C3 appear in the most repositories here.

Which microcontrollers do boards using the SX1281IMLTRT use?

Most are built on ESP32 (8), ESP8266 (2) and STM32 (1).

How big is a typical board using the SX1281IMLTRT?

The median is 21.8 × 13.9 mm, and 8% are two-layer designs.

What is the most popular open source board using the SX1281IMLTRT?

By GitHub stars, Merlyn435 by YeetTheAnson, with 4 stars.

Can I simulate one of these boards using the SX1281IMLTRT before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part