AtmosMesh Room protected carrier
About the AtmosMesh Room protected carrier PCB
AtmosMesh Room protected carrier is an open source PCB design by konih, published on GitHub under the MIT license. It is a 2-layer board measuring 80 × 60 mm, with 16 components from 11 distinct parts.
Other key parts include the IDEASPARK_ESP32_1V14_TFT_30PIN. By type, the board carries 7 capacitors and 1 IC.
It belongs with the iot & wireless, sensors and displays & leds designs in this gallery.
From the project
ESP32 indoor air-quality station: PM, climate, and a local OLED — headed for MQTT, Home Assistant, and Grafana.
DO NOT ENERGISE THIS BOARD YET. The controller and every module connector order are now identified, but no supply voltage or output swing has been measured on the 5 V modules. This project is a protected, reviewable starting point, not a wiring approval.
The controller is the ideaspark ESP32 1.14 inch TFT LCD board (ESP32-WROOM-32), confirmed from docs/hardware/ideaspark-esp32-tft-pinout.png. Its 30 pins and their order are therefore no longer provisional: pads 1–15 are the left column and 16–30 the right column, both counted from the USB/button end. What remains unmeasured is the physical…
Main components on the AtmosMesh Room protected carrier
AtmosMesh Room protected carrier bill of materials (BOM)
16 components, 11 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | IDEASPARK_ESP32_1V14_TFT_30PIN | Ideaspark_30Pin_Provisional | U1 |
| 1 | LED RED 3V3 LIVE | D_Axial_P7.62mm | D_LED_3V3 |
| 1 | SELECT: 1-2 USB / 2-3 EXT | PinHeader_1x03_P2.54mm | JP_5V_SRC |
| 2 | DEFAULT_OPEN | Jumper_2_Open_P2.54mm | JP_PIR_5V, JP_SDS_5V |
| 1 | EXT 5V IN / GND | PinHeader_1x02_P2.54mm | J_5V_EXT |
| 1 | 470R | R_Axial_P7.62mm | R_LED_3V3 |
| 1 | 3V3/GND | TestPoint_2Pin_THT | TP_3V3 |
| 1 | 5V/GND | TestPoint_2Pin_THT | TP_5V |
| 4 | 100NF 100nF | C_Disc_P5.00mm | C1, C3, C4, C7 |
| 2 | 100uF | C_Radial_P2.00mm | C2, C5 |
| 1 | 470uF | C_Radial_P2.00mm | C6 |
AtmosMesh Room protected carrier design files
The KiCad project lives in the konih/atmosmesh repository on GitHub; these links point at the commit this page was built from.
AtmosMesh Room protected carrier: common questions
How big is the AtmosMesh Room protected carrier PCB?
The AtmosMesh Room protected carrier measures 80 × 60 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the AtmosMesh Room protected carrier?
16 components, from 11 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the AtmosMesh Room protected carrier design files?
From the konih/atmosmesh repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the AtmosMesh Room protected carrier design in my own project?
Yes, under the terms of its MIT license, which konih chose for the repository.
atopile
StuckAtPrototype
AxxAxx
Mentra-Community