HardLabs

Drone o tron 1 0Rev1 rounded edges

koNrand·drone-o-tron·Kicad_schematic_board_layout_rounded_edges/drone_o_tron_1_0Rev1_rounded_edges.kicad_pcb

Drone o tron 1 0Rev1 rounded edges PCB layout, top view — open source board by koNrand
Simulate this board

About the Drone o tron 1 0Rev1 rounded edges PCB

Drone o tron 1 0Rev1 rounded edges is an open source PCB design by koNrand, published on GitHub. It is a 2-layer board measuring 161.8 × 100 mm, with 99 components from 45 distinct parts.

Other key parts include the MCP6004, MCP6002, NE555 and Klaviatur_one_octave. By type, the board carries 52 resistors, 15 capacitors, 6 diodes, 5 ICs, 5 switches and 3 transistors.

It belongs with the audio, keyboards and robotics & motion designs in this gallery.

From the project

Single-voice mini synthesizer with ribbon keyboard, controlled via a mono audio cable.

Für Neulinge: Lade dieses Repository herunter, um die Dateien zu benutzen. Ein Öffnen über den Browser funktioniert in der Regel nicht! Klicke dazu auf den grünen Button 'Code' und dann auf 'Download ZIP'.

For newbies: Download this repository to use the files. Opening them via the browser usually does not work! Click on the green button 'Code' and then on 'Download ZIP'.

Main components on the Drone o tron 1 0Rev1 rounded edges

MCP6004MCP6002NE555Klaviatur_one_octave

Drone o tron 1 0Rev1 rounded edges bill of materials (BOM)

99 components, 45 distinct parts.

QtyPartRefs
2
MCP6004
U1, U2
1
MCP6002
U3
1
NE555
U201
1
Klaviatur_one_octave
U301
1
NPN-BJT/Bipo
Q201
1
high_beta_NPN-BJT/Bipo
Q701
1
high_beta_PNP-BJT/Bipo
Q702
1
3.5mm_AUX_plug/buchse_PJ392_vertical
J301
1
AudioJack3_SwitchTR
J701
1
R203
BT101
1
Speaker_Lautsprecher
LS701
6
10kΩ_lin
RV201, RV303, RV501, RV602, RV701, RV801
2
10kΩ_trim
RV301, RV302
1
50kΩ_log_stereo
RV601
3
slider_switch/schiebeschalter
SW101, SW302, SW701
1
push_button/Knopf
SW301
1
DIP_switch
SW801
5
Schottkydiode
D101, D201, D202, D601, D602
1
LED
D102
2
10µF
C101, C401
Show 25 more
QtyPartRefs
2
470nF
C203, C801
5
100nF
C204, C302, C303, C402, C604
1
100nF
C205
2
100µF
C305, C702
1
10µF
C306
2
4.7nF
C601, C602
1
1kΩ
R101
24
1.5kΩ
R201, R204, R205, R302, R303, R304, R305, R306 +16
4
6.8kΩ
R202, R206, R331, R332
1
1MΩ
R203
1
330Ω
R308
1
402Ω
R309
1
442Ω
R310
1
536Ω
R311
1
619Ω
R312
1
698Ω
R313
1
787Ω
R314
1
910Ω
R315
1
1.05kΩ
R316
1
1.21kΩ
R317
1
1.33kΩ
R318
3
100Ω
R319, R702, R703
2
47kΩ
R320, R701
5
10kΩ
R401, R402, R501, R604, R605
1
3.5kΩ
R603

Drone o tron 1 0Rev1 rounded edges design files

The KiCad project lives in the koNrand/drone-o-tron repository on GitHub; these links point at the commit this page was built from.

Drone o tron 1 0Rev1 rounded edges: common questions

How big is the Drone o tron 1 0Rev1 rounded edges PCB?

The Drone o tron 1 0Rev1 rounded edges measures 161.8 × 100 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Drone o tron 1 0Rev1 rounded edges?

99 components, from 45 distinct parts. The full bill of materials is listed on this page.

Where can I download the Drone o tron 1 0Rev1 rounded edges design files?

From the koNrand/drone-o-tron repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Drone o tron 1 0Rev1 rounded edges design in my own project?

The repository has no license, so all rights stay with koNrand. Use it as a reference, and ask the author before reusing the design.

More boards in drone-o-tron

Similar boards