Rc plane
koppanybme·rc-plane·kicad/rc_plane_v1.0/rc_plane_v1.0.kicad_pcb
About the Rc plane PCB
Rc plane is an open source STM32 PCB design by koppanybme, published on GitHub. It is a 2-layer board measuring 47 × 45 mm, with 57 components from 29 distinct parts.
Its main chip is the STM32G474CEUx, from the STM32 family. Other key parts include the E22-900M22S, MCP73871-2CC and AP2112K-3.3. By type, the board carries 23 capacitors, 20 resistors, 5 connectors, 4 ICs, 2 diodes and 1 crystal.
Main components on the Rc plane
Rc plane bill of materials (BOM)
57 components, 29 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | E22-900M22S | E22-900M22S | IC1 |
| 1 | STM32G474CEUx | QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mm | U1 |
| 1 | MCP73871-2CC | QFN-20-1EP_4x4mm_P0.5mm_EP2.5x2.5mm | U2 |
| 1 | AP2112K-3.3 | SOT-23-5 | U3 |
| 1 | 8M | Crystal_SMD_5032-2Pin_5.0x3.2mm | Y1 |
| 1 | USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_G-Switch_GT-USB-7010ASV | J1 |
| 1 | Battery | JST_GH_SM02B-GHS-TB_1x02-1MP_P1.25mm_Horizontal | J2 |
| 1 | STICKS_L | JST_GH_SM04B-GHS-TB_1x04-1MP_P1.25mm_Horizontal | J3 |
| 1 | STICKS_R | JST_GH_SM04B-GHS-TB_1x04-1MP_P1.25mm_Horizontal | J4 |
| 1 | DEBUG | JST_GH_SM04B-GHS-TB_1x04-1MP_P1.25mm_Horizontal | J5 |
| 1 | SW_Push | SW_Push_6.0_3.5_MPTSM | SW2 |
| 1 | Red | LED_D3.0mm | D1 |
| 1 | LED_ARGB | PinHeader_1x04_P1.27mm_Vertical | D2 |
| 1 | 120R | R_0603_1608Metric | FB1 |
| 3 | 10u | C_0603_1608Metric | C1, C13, C17 |
| 2 | 4.7u | C_0603_1608Metric | C2, C3 |
| 4 | 1u | C_0603_1608Metric | C4, C5, C7, C8 |
| 1 | 10n | C_0603_1608Metric | C6 |
| 11 | 100n | C_0603_1608Metric | C9, C10, C11, C12, C14, C15, C16, C20 +3 |
| 2 | 15p | C_0603_1608Metric | C18, C19 |
Show 9 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 22 | R_0603_1608Metric | R1, R2 |
| 2 | 5.1k | R_0603_1608Metric | R3, R4 |
| 1 | 62 | R_0603_1608Metric | R5 |
| 3 | 270 | R_0603_1608Metric | R6, R7, R18 |
| 1 | 2k | R_0603_1608Metric | R8 |
| 1 | 3.3k | R_0603_1608Metric | R9 |
| 5 | 10k | R_0603_1608Metric | R10, R11, R12, R13, R19 |
| 4 | 100 | R_0603_1608Metric | R14, R15, R16, R17 |
| 1 | 24k | R_0603_1608Metric | R20 |
Rc plane design files
The KiCad project lives in the koppanybme/rc-plane repository on GitHub; these links point at the commit this page was built from.
Rc plane: common questions
What microcontroller does the Rc plane use?
The Rc plane is built around the STM32G474CEUx, from the STM32 family.
How big is the Rc plane PCB?
The Rc plane measures 47 × 45 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Rc plane?
57 components, from 29 distinct parts. The full bill of materials is listed on this page.
Where can I download the Rc plane design files?
From the koppanybme/rc-plane repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Rc plane design in my own project?
The repository has no license, so all rights stay with koppanybme. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Rc plane without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k