10 open source boards using the MCP73871-2CC

Real designs built with the MCP73871-2CC, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

10 boardsClear filters|Most starred

How designs wire the MCP73871-2CC

Read from the KiCad layouts of 10 open source designs, one per repository: what each pin of the MCP73871-2CC connects to, and the resistors, capacitors and other passives placed on it.

  • The PROG3 pin has a resistor to GND on 10 of 10 designs, most often 100 kΩ (then 15 kΩ).
  • The PROG1 pin has a resistor to GND on 10 of 10 designs, most often 2 kΩ (then 3.3 kΩ).
  • The VBAT pins have a decoupling capacitor on 10 of 10 designs, most often 4.7 µF (then 100 nF).
  • The OUT pins have a capacitor to GND on 9 of 10 designs, most often 4.7 µF (then 1 µF).
OUTpin 1, 20Connected to: A connector 20%, AP2112K-3.3 20% · 5V 40%
  • Capacitor to GND on 90% · 4.7 µF (14), 1 µF (6), 10 µF (4)
VPCCpin 2Connected to: VBUS 70% · a signal 30%
  • Decoupling capacitor on 70% · 10 µF (6), 1 µF (1), 4.7 µF (1)
SELpin 3Connected to: GND 60% · a signal 30%
  • Capacitor to GND on 30% · 10 µF (2), 4.7 µF (1), 1 µF (1)
THERMpin 5Connected to: Signal 90%
  • Resistor to GND on 70% · 10 kΩ (6), 15 kΩ (1)
PGpin 6Connected to: The microcontroller 20%
  • Series resistor on 40% · 470 Ω (2), 62 Ω (1), 390 Ω (1)
STAT2pin 7Connected to: The microcontroller 20%
  • Series resistor on 50% · 470 Ω (2), 560 Ω (1), 270 Ω (1)
STAT1/LBOpin 8Connected to: The microcontroller 20%
  • Series resistor on 50% · 470 Ω (2), 560 Ω (1), 270 Ω (1)
VSSpin 10, 11, 21Connected to: GND 100%
PROG3pin 12Connected to: Signal 100%
  • Resistor to GND on 100% · 100 kΩ (3), 15 kΩ (2), 20 kΩ (1)
PROG1pin 13Connected to: Signal 100%
  • Resistor to GND on 100% · 2 kΩ (6), 3.3 kΩ (2), 1 kΩ (1)
VBATpin 14, 15Connected to: BATT 60% · a signal 40%
  • Decoupling capacitor on 100% · 4.7 µF (13), 100 nF (4), 10 µF (4)
VBAT_SENSEpin 16Connected to: BATT 60% · a signal 40%
  • Decoupling capacitor on 90% · 4.7 µF (6), 100 nF (2), 10 µF (2)
CEpin 17Connected to: VBUS 60% · a signal 40%
INpin 18, 19Connected to: VBUS 80% · a signal 20%

2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Endeavour2 by petrmikheev, Imu rc hand unit by DimitriOnLSD, BoardGame by jkordek1 and Time2time by Resaj.

The MCP73871-2CC in open source designs

The gallery holds 10 open source boards using the MCP73871-2CC from 10 GitHub repositories; a typical one measures about 80 × 65.4 mm and carries around 71 components.

60% are two-layer designs, the rest use four layers or more, and 40% carry an open source license.

The most starred is Endeavour2 by petrmikheev.

Parts used alongside the MCP73871-2CC

Microcontrollers on boards using the MCP73871-2CC

MCP73871-2CC: common questions

Where can I find a MCP73871-2CC reference design?

Each of the 10 boards on this page is a real design using the MCP73871-2CC. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What resistor goes on the MCP73871-2CC PROG3 pin?

The PROG3 pin has a resistor to GND on 10 of 10 designs, most often 100 kΩ (then 15 kΩ). Counted from the KiCad layouts of 10 open source designs using the MCP73871-2CC.

What resistor goes on the MCP73871-2CC PROG1 pin?

The PROG1 pin has a resistor to GND on 10 of 10 designs, most often 2 kΩ (then 3.3 kΩ). Counted from the KiCad layouts of 10 open source designs using the MCP73871-2CC.

What decoupling capacitors do designs use on the MCP73871-2CC VBAT pin?

The VBAT pins have a decoupling capacitor on 10 of 10 designs, most often 4.7 µF (then 100 nF). Counted from the KiCad layouts of 10 open source designs using the MCP73871-2CC.

Which microcontrollers do boards using the MCP73871-2CC use?

Most are built on ESP32 (5), RP2040/RP2350 (2), STM32 (2) and AVR/Arduino (1).

How big is a typical board using the MCP73871-2CC?

The median is 80 × 65.4 mm, and 60% are two-layer designs.

What is the most popular open source board using the MCP73871-2CC?

By GitHub stars, Endeavour2 by petrmikheev, with 49 stars.

Can I simulate one of these boards using the MCP73871-2CC before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part