14 open source boards using the E22-900M22S

Real designs built with the E22-900M22S, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

14 boardsClear filters|Most starred

How designs wire the E22-900M22S

Read from the KiCad layouts of 14 open source designs, one per repository: what each pin of the E22-900M22S connects to, and the resistors, capacitors and other passives placed on it.

  • The VCC pin has a decoupling capacitor on 12 of 14 designs, most often 100 nF (then 1 µF).
  • The ANT pin is left unconnected on 10 of 14 designs (a signal on 4).
GNDpin 1, 2, 3, 4, 5, 10, 11, 12, 20, 22Connected to: GND 100%
VCCpin 9Connected to: 3.3V 79% · a signal 21%
  • Decoupling capacitor on 86% · 100 nF (16), 1 µF (4), 10 µF (4)
ANTpin 21Connected to: Not connected 71% · a signal 29%

10 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Electronics-Design-Exploiteers-Hacker-Pager by exploiteers, Chaac ng by alvarop, Tanmatsu hardware by Nicolai-Electronics and R2 HH Controllers by greghulette.

The E22-900M22S in open source designs

The gallery holds 14 open source boards using the E22-900M22S from 14 GitHub repositories; a typical one measures about 66.5 × 78.2 mm and carries around 88 components.

57% use four copper layers or more, and 57% carry an open source license.

The most starred is Electronics-Design-Exploiteers-Hacker-Pager by exploiteers.

Parts used alongside the E22-900M22S

Microcontrollers on boards using the E22-900M22S

E22-900M22S: common questions

Where can I find a E22-900M22S reference design?

Each of the 14 boards on this page is a real design using the E22-900M22S. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the E22-900M22S VCC pin?

The VCC pin has a decoupling capacitor on 12 of 14 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 14 open source designs using the E22-900M22S.

How is the E22-900M22S ANT pin connected?

The ANT pin is left unconnected on 10 of 14 designs (a signal on 4). Counted from the KiCad layouts of 14 open source designs using the E22-900M22S.

What parts are used alongside the E22-900M22S?

The USBLC6-2SC6, AP2112K-3.3 and MCP73831-2-OT appear in the most repositories here.

Which microcontrollers do boards using the E22-900M22S use?

Most are built on STM32 (7), ESP32 (5) and Nordic nRF (2).

How big is a typical board using the E22-900M22S?

The median is 66.5 × 78.2 mm, and 43% are two-layer designs.

What is the most popular open source board using the E22-900M22S?

By GitHub stars, Electronics-Design-Exploiteers-Hacker-Pager by exploiteers, with 27 stars.

Can I simulate one of these boards using the E22-900M22S before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part