Center
kramerbastian·doppeltraktion·hardware/pcbs/center/center.kicad_pcb
About the Center PCB
Center is an open source PCB design by kramerbastian, published on GitHub. It is a 2-layer board measuring 91.5 × 90.5 mm, with 20 components from 7 distinct parts.
Other key parts include the PCF8574T. By type, the board carries 6 diodes, 5 switches, 5 resistors, 2 capacitors, 1 IC and 1 connector.
From the project
doppeltraktion is the world‘s simplest model railway throttle.
Doppeltraktion (German for double heading — that's when two locomotives pull together on a train) is the world's most intuitive model railway throttle. It has ≈6x fewer buttons and switches than market competitors, such as the Uhlenbrock Intellibox II. It connects to your model railroad using LCC or to your computer via USB to control software such as RocRail or JMRI¹ and can control two locomotives simultaneously. ¹ not yet implemented

Main components on the Center
Center bill of materials (BOM)
20 components, 7 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PCF8574T | SOIC-16W_7.5x10.3mm_P1.27mm | U1 |
| 1 | JST_PH | JST_PH_B6B-PH-K_1x06_P2.00mm_Vertical | J1 |
| 5 | SW_Push | SW_Cherry_MX_1.00u_PCB | SW1, SW2, SW3, SW4, SW5 |
| 6 | WS2812B | LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D1, D2, D3, D4, D5, D6 |
| 1 | 10u | C_Radial_D6.3mm_H11.0mm_P2.50mm | C1 |
| 1 | 100n | C_1206_3216Metric | C2 |
| 5 | 10k | R_1206_3216Metric | R1, R2, R3, R4, R5 |
Center design files
The KiCad project lives in the kramerbastian/doppeltraktion repository on GitHub; these links point at the commit this page was built from.
Center: common questions
How big is the Center PCB?
The Center measures 91.5 × 90.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Center?
20 components, from 7 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Center design files?
From the kramerbastian/doppeltraktion repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Center design in my own project?
The repository has no license, so all rights stay with kramerbastian. Use it as a reference, and ask the author before reusing the design.