Control

kramerbastian·doppeltraktion·hardware/pcbs/control/Control.kicad_pcb

Control PCB layout, top view — open source ESP32 board by kramerbastian

About the Control PCB

Control is an open source ESP32 PCB design by kramerbastian, published on GitHub. It is a 2-layer board measuring 71 × 60 mm, with 28 components from 18 distinct parts.

Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the AMS1117-3.3 and TJA1051T. By type, the board carries 11 connectors, 7 capacitors, 4 resistors, 3 ICs and 3 switches.

From the project

doppeltraktion is the world‘s simplest model railway throttle.

Doppeltraktion (German for double heading — that's when two locomotives pull together on a train) is the world's most intuitive model railway throttle. It has ≈6x fewer buttons and switches than market competitors, such as the Uhlenbrock Intellibox II. It connects to your model railroad using LCC or to your computer via USB to control software such as RocRail or JMRI¹ and can control two locomotives simultaneously. ¹ not yet implemented

Control, from the project README
From the project README

Main components on the Control

Control bill of materials (BOM)

28 components, 18 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32-S3-WROOM-1
U1
1
AMS1117-3.3
U2
1
TJA1051T
U3
1
USB_B
J1
2
RJ45_LED_Shielded
J2, J3
2
Conn_01x07
J4, J5
3
JST PH
J6, J7, J8
1
JST PH
J9
1
JST PH
J10
1
Conn_01x02
J11
1
Reset
SW1
1
Boot
SW2
1
PWR Sel
SW3
4
100n
C1, C2, C3, C7
3
100u
C4, C5, C6
1
10k
R1
1
120
R2
2
150
R19, R20

Control design files

The KiCad project lives in the kramerbastian/doppeltraktion repository on GitHub; these links point at the commit this page was built from.

Control: common questions

What microcontroller does the Control use?

The Control is built around the ESP32-S3-WROOM-1, from the ESP32 family.

How big is the Control PCB?

The Control measures 71 × 60 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Control?

28 components, from 18 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Control design files?

From the kramerbastian/doppeltraktion repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Control design in my own project?

The repository has no license, so all rights stay with kramerbastian. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Control without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in doppeltraktion

Similar boards