10 open source boards using the PCF8574T
Real designs built with the PCF8574T, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
LAMEBOY
davedarko
45.7 × 67.3 mm70 parts2LNo license20ESP32
Nomad
0Zane
65 × 120 mm69 parts2LMIT15STM32
Chronolog
slemanz
100 × 50 mm87 parts4LNo license2ESP32
Control
kramerbastian
94.6 × 88.4 mm65 parts2LNo license1- schematic only · 74 partsPIC
Fm1216me fm tuner
tregubov-av
74 partsMIT1 ESP32
Jammer
aryakaithal8
53.1 × 100.5 mm90 parts2LNo license0AVR/Arduino
KM11 mainboard
fjalvingh
131.8 × 80 mm41 parts2LNo license0- schematic only · 38 parts
MemoryBlink
drvnprgrmr
38 partsMIT0 Center
kramerbastian
91.5 × 90.5 mm20 parts2LNo license0Switches with lcd display
RomLab
115 × 85 mm76 parts2LNo license1
How designs wire the PCF8574T
Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the PCF8574T connects to, and the resistors, capacitors and other passives placed on it.
- The SCL pin has a pull-up to 3.3V on 5 of 8 designs, most often 4.7 kΩ (then 1 kΩ).
- The SDA pin has a pull-up to 3.3V on 5 of 8 designs, most often 4.7 kΩ (then 1 kΩ).
- The VDD pin has a decoupling capacitor on 5 of 8 designs, most often 100 nF (then 1 µF).
- The INT pin is left unconnected on 5 of 8 designs (a signal on 3).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GND_8pin 8 | Connected to: GND 100% | — |
| INTpin 13 | Connected to: Not connected 63% · a signal 38% | — |
| SCLpin 14 | Connected to: The microcontroller 63%, a connector 50%, PCF8574T 25% |
|
| SDApin 15 | Connected to: The microcontroller 63%, a connector 50%, PCF8574T 25% |
|
| VDDpin 16 | Connected to: 3.3V 88% |
|
11 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include LAMEBOY by davedarko, Nomad by 0Zane, Chronolog by slemanz and Control by kramerbastian.
The PCF8574T in open source designs
The gallery holds 10 open source boards using the PCF8574T from 10 GitHub repositories; a typical one measures about 93 × 86.7 mm and carries around 70 components.
88% are two-layer designs, the rest use four layers or more, and 30% carry an open source license.
The most starred is LAMEBOY by davedarko.
Parts used alongside the PCF8574T
Microcontrollers on boards using the PCF8574T
What boards using the PCF8574T are built for
PCF8574T: common questions
Where can I find a PCF8574T reference design?
Each of the 10 boards on this page is a real design using the PCF8574T. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What pull-up resistor is used on the PCF8574T SCL pin?
The SCL pin has a pull-up to 3.3V on 5 of 8 designs, most often 4.7 kΩ (then 1 kΩ). Counted from the KiCad layouts of 8 open source designs using the PCF8574T.
What pull-up resistor is used on the PCF8574T SDA pin?
The SDA pin has a pull-up to 3.3V on 5 of 8 designs, most often 4.7 kΩ (then 1 kΩ). Counted from the KiCad layouts of 8 open source designs using the PCF8574T.
What decoupling capacitors do designs use on the PCF8574T VDD pin?
The VDD pin has a decoupling capacitor on 5 of 8 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 8 open source designs using the PCF8574T.
Which microcontrollers do boards using the PCF8574T use?
Most are built on ESP32 (3), AVR/Arduino (2), PIC (1) and STM32 (1).
How big is a typical board using the PCF8574T?
The median is 93 × 86.7 mm, and 88% are two-layer designs.
What is the most popular open source board using the PCF8574T?
By GitHub stars, LAMEBOY by davedarko, with 20 stars.
Can I simulate one of these boards using the PCF8574T before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.