HybridPanda
kriptomad·openpilot-honda-city-brasil·hardware/hybrid-panda/HybridPanda.kicad_pcb
About the HybridPanda PCB
HybridPanda is an open source STM32 PCB design by kriptomad, published on GitHub under the CERN-OHL-S-2.0 license. It is a 4-layer board measuring 50.9 × 46.7 mm, with 118 components from 52 distinct parts.
Its main chip is the STM32H725ZGT6, from the STM32 family. Other key parts include the TPS5450DDAR, 10.0 QHHTZB6.3, FM-B1921RGBA-SH, TJA1042TK/3/1J and XL1509-3.3E1. By type, the board carries 58 capacitors, 24 resistors, 13 diodes, 11 ICs, 4 transistors and 4 inductors.
From the project
openpilot/flowpilot for the Honda City G7 2023 (Brazil): black panda firmware, openpilot v0.9.9 port, flowpilot APK, Hybrid Panda STM32H725 PCB. Release index repo.
An end-to-end, open effort to run openpilot / flowpilot on a 7th generation Honda City (2023, Brazilian market, Honda Sensing camera-only "Bosch radarless", classic CAN, Bosch B harness) using black panda class hardware (STM32F413), together with a from-scratch Hybrid Panda PCB design (STM32H725, CAN-FD capable, black panda form factor) intended as future hardware. The repository collects the hardware design, the panda firmware trees, the car ports for two software stacks, the flashing procedure and every audit and report produced along the way.
Main components on the HybridPanda
HybridPanda bill of materials (BOM)
118 components, 52 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TPS5450DDAR AP22615AWU-7 Texas Instruments | SOT-23-6 | U1 |
| 1 | 10.0 QHHTZB6.3 10_0_QHHTZB6_3 SHOU HAN | USB-A-TH_10.0QHHTZB6.3 | U3 |
| 1 | FM-B1921RGBA-SH Foshan NationStar | LED-ARRAY-SMD_4P-L2.2-W2.1-BR | U5 |
| 1 | TPS5450DDAR Texas Instruments | CONV_TPS5450DDAR | U6 |
| 1 | STM32H725ZGT6 STMicroelectronics | LQFP-144_20x20mm_P0.5mm | U7 |
| 4 | TJA1042TK/3/1J TJA1042TK-3 NXP | DFN-8-1EP_3x3mm_P0.65mm_EP1.55x2.4mm | U8, U9, U10, U11 |
| 1 | XL1509-3.3E1 XL1509-3.3 XLSEMI | Diodes_PSOP-8 | U12 |
| 1 | USBLC6-2SC6 STMicroelectronics | SOT-23-6 | U13 |
| 2 | DDTA143ECA-7-F DDTA143ECA-7-F P08 Diodes Inc | SOT23-3 | Q1, Q2 |
| 1 | PDTC114EU,115 PDTC114EU Nexperia | SOT-323_SC-70 | Q3 |
| 1 | HY12P03C2 HUAYI | PowerPAK_SO-8_Single | Q4 |
| 1 | X322525MOB4SI 25MHz X322525MOB4SI YXC | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 20021121-00010C4LF SWD Amphenol ICC | PinHeader_2x05_P1.27mm_Vertical_SMD | J1 |
| 1 | TYPE-C-31-M-04 Korean Hroparts | USB-C-SMD_TYPE-C-USB-20 | P1 |
| 1 | SKQGAFE010 SW_Push Alps Alpine | SW_SPST_SKQG_WithStem | SW1 |
| 1 | B540C-13-F SMAJ16CA-13-F Diodes Inc | DIOM4325X250N | D1 |
| 1 | BAS40WS 43 Changjing | D_SOD-323 | D2 |
| 5 | PESD2CAN,215 Nexperia | SOT95P230X110-3N | D5, D6, D7, D8, D9 |
| 1 | BAS70H,115 BAS70H 115 Nexperia | D_SOD-123F | D10 |
| 1 | B340A-13-F B320AE-13 Diodes Inc | D_SMA | D11 |
Show 32 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | B540C-13-F SM540C Diodes Inc | D_SMC | D12 |
| 2 | BAT54S,215 BAT54S Nexperia | SOT-23 | D13, D14 |
| 1 | BZT52C12 High Diode (ou equivalente) | D_SOD-123 | D15 |
| 1 | GZ1608D601TF 600R@100MHz Sunlord | L_0603_1608Metric | FB1 |
| 1 | SMMS0650-470M 47uH 2A - SMMS0650-470M SXN | IND-SMD_L7.3-W6.8 | L3 |
| 1 | MWSA1004S-150MT 15uH Sunlord | L_10.5x11.5_H4.0 | L4 |
| 1 | DFE201610E-2R2M=P2 2.2uH DFE201610E-2R2M Murata | L_Murata_DFE201610P | L5 |
| 30 | CL05B104KB54PNC 100NF Samsung | C_0402_1005Metric | C1, C2, C5, C11, C14, C26, C27, C28 +22 |
| 1 | CL05B103KB5NNNC 47uF Samsung | C_0805_2012Metric | C3 |
| 2 | CL21A106KBYQNNE 10uF Samsung | C_0805_2012Metric | C4, C12 |
| 2 | CC0805KKX7R9BB225 2.2uF Yageo | C_0805_2012Metric | C6, C7 |
| 1 | CL05A106MP5NUNC 10uF Samsung | C_0402_1005Metric | C8 |
| 7 | 0805X476M100NT 47uF Fenghua | C_0805_2012Metric | C10, C16, C17, C18, C19, C20, C21 |
| 2 | 0402CG180J500NT 18pF Fenghua | C_0402_1005Metric | C23, C24 |
| 1 | CL05B104KB54PNC 0.1uF Samsung | C_0402_1005Metric | C34 |
| 1 | CL05B103KB5NNNC 10nF (LOW ESR) Samsung | C_0402_1005Metric | C37 |
| 2 | CL10A225KO8NNNC 2.2uF Samsung | C_0603_1608Metric | C39, C40 |
| 1 | 0402B221K500NT 220pF Fenghua | C_0402_1005Metric | C41 |
| 1 | CL21A106KAYNNNE 10uF Samsung | C_0805_2012Metric | C42 |
| 2 | CL05A105KA5NQNC 1uF Samsung | C_0402_1005Metric | C43, C63 |
| 4 | CL10A475KO8NNNC 4.7uF Samsung | C_0603_1608Metric | C60, C61, C62, C65 |
| 1 | CL05A225MQ5NSNC 2.2uF Samsung | C_0402_1005Metric | C64 |
| 1 | 0603WAF1002T5E 10k Uniroyal | R_0603_1608Metric | R1 |
| 1 | 0603WAF3161T5E 1K Uniroyal | R_0402_1005Metric | R2 |
| 14 | 0402WGF1002TCE 10K Uniroyal | R_0402_1005Metric | R3, R9, R14, R15, R16, R23, R24, R26 +6 |
| 1 | 0402WGF1002TCE 10K (1%) Uniroyal | R_0402_1005Metric | R5 |
| 1 | 0603WAF3161T5E 3.16K (1%) Uniroyal | R_0603_1608Metric | R6 |
| 1 | 0402WGF1800TCE 180R Uniroyal | R_0402_1005Metric | R17 |
| 1 | ERJ2RKF1100X 110R Panasonic | R_0402_1005Metric | R18 |
| 1 | 0402WGF1000TCE 100R Uniroyal | R_0402_1005Metric | R19 |
| 2 | 0402WGF220JTCE 22R Uniroyal | R_0402_1005Metric | R20, R21 |
| 1 | 0402WGF2401TCE 2.4K Uniroyal | R_0402_1005Metric | R27 |
HybridPanda design files
The KiCad project lives in the kriptomad/openpilot-honda-city-brasil repository on GitHub; these links point at the commit this page was built from.
HybridPanda: common questions
What microcontroller does the HybridPanda use?
The HybridPanda is built around the STM32H725ZGT6, from the STM32 family.
How big is the HybridPanda PCB?
The HybridPanda measures 50.9 × 46.7 mm, has 4 copper layers and is 1.59 mm thick.
How many components are on the HybridPanda?
118 components, from 52 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the HybridPanda design files?
From the kriptomad/openpilot-honda-city-brasil repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the HybridPanda design in my own project?
Yes, under the terms of its CERN-OHL-S-2.0 license, which kriptomad chose for the repository.
Can I test firmware for the HybridPanda without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in openpilot-honda-city-brasil
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k