8 open source boards using the TPS5450DDAR
Real designs built with the TPS5450DDAR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
HybridPanda
kriptomad
50.9 × 46.7 mm118 parts4LCERN-OHL-S-2.01Fab computer hackerfab
jonahsaunders
101.7 × 78.1 mm80 parts2LNo license1STM32
Int brain stm32
eccentricOrange
170.2 × 79 mm213 parts4LNo license0STM32
Hardware
NekoPurrTech
164.6 × 260.3 mm181 parts2LNo license0STM32
BlackPanda
lukasloetkolben
47.5 × 41.7 mm86 parts4LMIT92STM32
Snapshot
kriptomad
50.9 × 46.7 mm118 parts4LCERN-OHL-S-2.01Carte Alim V6 2022
PCBrs
98.3 × 111.5 mm118 parts4LNo license0AVR/Arduino
PowerSupply
LOEWE-emergenCITY
100 × 100 mm35 parts2LNo license1
How designs wire the TPS5450DDAR
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the TPS5450DDAR connects to, and the resistors, capacitors and other passives placed on it.
- The BOOT pin has a series capacitor on 6 of 7 designs, most often 10 nF (then 100 nF).
- The VSENSE pin has a resistor to GND on 6 of 7 designs, most often 3.16 kΩ (then 1.13 kΩ).
- The VSENSE pin has a pull-up to 5V on 6 of 7 designs, most often 10 kΩ (then 10.5 kΩ).
- The PH pin has a series capacitor on 6 of 6 designs, most often 10 nF (then 100 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| BOOTpin 1 | Connected to: Signal 100% |
|
| NCpin 2, 3 | Connected to: Not connected 86% | — |
| VSENSEpin 4 | Connected to: Signal 100% |
|
| GNDpin 6 | Connected to: GND 86% | — |
| VINpin 7 | Connected to: 12V 67% · a signal 33% |
|
| PHpin 8 | Connected to: Signal 100% |
|
| POWERPADpin 9 | Connected to: GND 100% | — |
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include BlackPanda by lukasloetkolben, Fab computer hackerfab by jonahsaunders, HybridPanda by kriptomad and PowerSupply by LOEWE-emergenCITY.
The TPS5450DDAR in open source designs
The gallery holds 8 open source boards using the TPS5450DDAR from 7 GitHub repositories; a typical one measures about 99.2 × 78.5 mm and carries around 118 components.
63% use four copper layers or more, and 38% carry an open source license.
The most starred is BlackPanda by lukasloetkolben.
Parts used alongside the TPS5450DDAR
Microcontrollers on boards using the TPS5450DDAR
What boards using the TPS5450DDAR are built for
TPS5450DDAR: common questions
Where can I find a TPS5450DDAR reference design?
Each of the 8 boards on this page is a real design using the TPS5450DDAR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the TPS5450DDAR BOOT pin connected?
The BOOT pin has a series capacitor on 6 of 7 designs, most often 10 nF (then 100 nF). Counted from the KiCad layouts of 7 open source designs using the TPS5450DDAR.
What resistor goes on the TPS5450DDAR VSENSE pin?
The VSENSE pin has a resistor to GND on 6 of 7 designs, most often 3.16 kΩ (then 1.13 kΩ). Counted from the KiCad layouts of 7 open source designs using the TPS5450DDAR.
How is the TPS5450DDAR PH pin connected?
The PH pin has a series capacitor on 6 of 6 designs, most often 10 nF (then 100 nF). Counted from the KiCad layouts of 7 open source designs using the TPS5450DDAR.
Which microcontrollers do boards using the TPS5450DDAR use?
Most are built on STM32 (5) and AVR/Arduino (1).
How big is a typical board using the TPS5450DDAR?
The median is 99.2 × 78.5 mm, and 38% are two-layer designs.
What is the most popular open source board using the TPS5450DDAR?
By GitHub stars, BlackPanda by lukasloetkolben, with 92 stars.
Can I simulate one of these boards using the TPS5450DDAR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.