IMPULSE-CUFFLESS-BP
krunalvaghela1262-eng·IMPULSE-CUFFLESS-BP·hardware/pcb/device_pcb/second_pcb.kicad_pcb
About the IMPULSE-CUFFLESS-BP PCB
IMPULSE-CUFFLESS-BP is an open source STM32 PCB design by krunalvaghela1262-eng, published on GitHub. It is a 2-layer board measuring 122.3 × 66 mm, with 34 components from 19 distinct parts.
Its main chip is the YAAJ_BlackPill_SWD_Breakout, from the STM32 family. Other key parts include the DS32KHZSN# and ESP32-DEVKIT-V1. By type, the board carries 11 capacitors, 10 connectors, 5 resistors, 3 ICs, 3 diodes and 2 transistors.
It belongs with the iot & wireless, dev boards & breakouts and test & measurement designs in this gallery.
From the project
Cuffless blood-pressure monitor: ECG + chest and foot impedance pulse waves, onboard Pan-Tompkins and pulse-foot detection on STM32, Wi-Fi dashboard, KiCad PCB. Best Project finalist, EE 344 EDL, IIT Bombay.
The primary purpose of this PCB is to provide an organized and compact physical realization of the circuit. It is basically a Bio-Signal Acquisition Board. Most components are breakout/evaluation boards that are directly fixed onto the PCB using female header pins, with the PCB establishing the required electrical connections between them.
Both boards interface with the STM32 via SPI.

Main components on the IMPULSE-CUFFLESS-BP
IMPULSE-CUFFLESS-BP bill of materials (BOM)
34 components, 19 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | YAAJ_BlackPill_SWD_Breakout | YAAJ_BluePill_SWD_1 | U1 |
| 1 | DS32KHZSN# DS32KHZSN | SOIC127P1034X267-16N | U2 |
| 1 | ESP32-DEVKIT-V1 | MODULE_ESP32_DEVKIT_V1_modified | U6 |
| 2 | PNP | TO-92L_HandSolder_modified | Q1, Q2 |
| 2 | Conn_01x10_Socket | PinHeader_1x10_P2.54mm_Vertical | J1, J4 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_Phoenix_MKDS-3-2-5.08_1x02_P5.08mm_Horizontal | J2 |
| 1 | Conn_01x02_Pin | PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | Conn_01x07_Pin | PinHeader_1x07_P2.54mm_Vertical | J5 |
| 1 | Conn_01x06_Pin | PinHeader_1x06_P2.54mm_Vertical | J6 |
| 2 | Conn_01x05_Pin | PinHeader_1x05_P2.54mm_Vertical | J7, J9 |
| 1 | Conn_01x04_Pin | PinHeader_1x04_P2.54mm_Vertical | J10 |
| 1 | Conn_01x03_Pin | PinHeader_1x03_P2.54mm_Vertical | J11 |
| 3 | LED | LED_1206_3216Metric | D1, D2, D4 |
| 1 | 470u | CP_Radial_D8.0mm_P3.50mm | C1 |
| 9 | 0.1u | C_0805_2012Metric | C2, C4, C5, C6, C7, C8, C9, C10 +1 |
| 1 | 100u | CP_Radial_D5.0mm_P2.50mm | C3 |
| 1 | 1k | R_0805_2012Metric | R1 |
| 2 | 10k | R_0805_2012Metric | R2, R4 |
| 2 | 330 | R_0805_2012Metric | R3, R5 |
IMPULSE-CUFFLESS-BP design files
The KiCad project lives in the krunalvaghela1262-eng/IMPULSE-CUFFLESS-BP repository on GitHub; these links point at the commit this page was built from.
IMPULSE-CUFFLESS-BP: common questions
What microcontroller does the IMPULSE-CUFFLESS-BP use?
The IMPULSE-CUFFLESS-BP is built around the YAAJ_BlackPill_SWD_Breakout, from the STM32 family.
How big is the IMPULSE-CUFFLESS-BP PCB?
The IMPULSE-CUFFLESS-BP measures 122.3 × 66 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the IMPULSE-CUFFLESS-BP?
34 components, from 19 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the IMPULSE-CUFFLESS-BP design files?
From the krunalvaghela1262-eng/IMPULSE-CUFFLESS-BP repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the IMPULSE-CUFFLESS-BP design in my own project?
The repository has no license, so all rights stay with krunalvaghela1262-eng. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the IMPULSE-CUFFLESS-BP without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k