116 open source boards using the ESP32-DEVKIT-V1
Real designs built with the ESP32-DEVKIT-V1, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
ESP32-Dual-H-Bridge-Breakout-Board
BigJBehr
76.2 × 76.2 mm48 parts2LNo license5ESP32
Osciloscope-ESP32
cristobalcuevas
137.5 × 42.5 mm79 parts2LNo license4ESP32
Robotica
La-guajolota
100 × 100 mm52 parts2LMIT4ESP32
Bench psu monitor
fixthepixel
110 × 80 mm35 parts2LCustom license4ESP32
Rover-ELEC
rice-robotics-club
60.9 × 86.9 mm24 parts2LGPL-3.04ESP32
Robocup-2025
La-Quiche-Industrielle
173.5 × 150.4 mm12 parts2LMPL-2.04ESP32
ESP32Pet
dishishshawn
82.3 × 79 mm11 parts2LNo license4ESP32
Plant Partner PCB 1.0
aboler
148.3 × 69 mm82 parts2LNo license3ESP32
AvionicaJaburu
equipeantares
100.2 × 61.8 mm36 parts2LNo license3ESP32
ShrackThingy
bismarx-v1
230 × 100 mm153 parts2LNo license2ESP32
ESPDrive
Ehryk
44 × 64 mm53 parts4LBSD-3-Clause2ESP32
Main Board
Ensmasteel
200 × 100 mm48 parts2LNo license2ESP32
VX-Solenoid-Engine
SunritHazra
120 × 80 mm33 parts2LNo license2ESP32
ARGB-WLED-PC-Controller
jwidess
1 parts2LAGPL-3.02STM32
E bike conversion kit
ansh1113
186.9 × 129.8 mm175 parts4LNo license1ESP32
BLUE-ME ESP32 hard
facundosala
61 × 117.2 mm53 parts2LNo license1STM32
IMPULSE-CUFFLESS-BP
krunalvaghela1262-eng
122.3 × 66 mm34 parts2LNo license1ESP32
SYSMATT-WS2812-MATRIX-CARRIER
sysmatt
162 × 162 mm28 parts2LGPL-3.01ESP32
PCB 1
Nigonzalezf
100 × 100 mm12 parts2LMIT1ESP32
SBC
ahmedsiddyq
108.2 × 124.9 mm366 parts2LNo license0ESP32
Power Systems
nick19curtin
367.8 × 97.5 mm113 parts2LNo license0ESP32
Inverter
alheir
100 × 121 mm94 parts2LMIT0ESP32
Strange games — копия
kruglovvs
166 × 166 mm92 parts2LNo license0ESP32
QuinoaChipPlant
nanbuwks
180 × 250 mm87 parts2LNo license0ESP32
Dombyra.plus
zzertexx
466.1 × 23 mm65 parts2LNo license0ESP32
Kili
Nyaigoti
55 parts2LNo license0ESP32
Microcontroller Schematics
AlexFinns
79.4 × 70 mm49 parts2LNo license0ESP32
TPMS-2018-Toyota-Yaris iA
AjayaDahal
189 × 128 mm47 parts2LNo license0ESP32
Multi parameter-Medical-Measurement
BigSmartt01
90.3 × 96.7 mm42 parts2LNo license0ESP32
Balancio board
alvgaona
70 × 70 mm42 parts2LNo license0ESP32
Solar wifi weather station v3.3.5
3ddruck12
86.2 × 100 mm39 parts2LCC-BY-NC-4.00ESP32
PCB-SHIELD
ifsul-camaqua-robotica
97.5 × 66 mm38 parts2LNo license0ESP32
Embeddster
alheir
117.4 × 63 mm36 parts2LMIT0ESP32
Autohealer
sarpharaj-09
101.6 × 78.8 mm36 parts2LNo license0ESP32
IM-PULSE
vinay11hariharan-bit
122.3 × 66 mm34 parts2LNo license0ESP32
AKBONE2022
nanbuwks
96 × 128 mm31 parts2LCC0-1.00
How designs wire the ESP32-DEVKIT-V1
Read from the KiCad layouts of 83 open source designs, one per repository: what each pin of the ESP32-DEVKIT-V1 connects to, and the resistors, capacitors and other passives placed on it.
- The RX0 pin is left unconnected on 65 of 83 designs (a signal on 18).
- The VN pin is left unconnected on 77% of them (a signal on 18).
- The TX0 pin is left unconnected on 64 of 83 designs (a signal on 19).
- The EN pin is left unconnected on 76% of them (3.3V on 7, a signal on 13).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 2, 29 | Connected to: GND 79% | — |
| RX0pin 12 | Connected to: Not connected 78% · a signal 22% | — |
| TX0pin 13 | Connected to: Not connected 77% · a signal 23% | — |
| ENpin 16 | Connected to: Not connected 76% · a signal 15% | — |
| VPpin 17 | Connected to: Not connected 71% · a signal 23% | — |
| VNpin 18 | Connected to: Not connected 77% · a signal 21% | — |
23 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Edrumulus by corrados, LoRa by crnicholson, ESP32-Dual-H-Bridge-Breakout-Board by BigJBehr and Osciloscope-ESP32 by cristobalcuevas.
The ESP32-DEVKIT-V1 in open source designs
The gallery holds 116 open source boards using the ESP32-DEVKIT-V1 from 92 GitHub repositories; a typical one measures about 92.4 × 80 mm and carries around 22 components.
97% are two-layer designs, the rest use four layers or more, and 23% carry an open source license.
The most starred is Edrumulus by corrados.
Parts used alongside the ESP32-DEVKIT-V1
What boards using the ESP32-DEVKIT-V1 are built for
ESP32-DEVKIT-V1: common questions
Where can I find a ESP32-DEVKIT-V1 reference design?
Each of the 116 boards on this page is a real design using the ESP32-DEVKIT-V1. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the ESP32-DEVKIT-V1 RX0 pin connected?
The RX0 pin is left unconnected on 65 of 83 designs (a signal on 18). Counted from the KiCad layouts of 83 open source designs using the ESP32-DEVKIT-V1.
How is the ESP32-DEVKIT-V1 VN pin connected?
The VN pin is left unconnected on 77% of them (a signal on 18). Counted from the KiCad layouts of 83 open source designs using the ESP32-DEVKIT-V1.
How is the ESP32-DEVKIT-V1 TX0 pin connected?
The TX0 pin is left unconnected on 64 of 83 designs (a signal on 19). Counted from the KiCad layouts of 83 open source designs using the ESP32-DEVKIT-V1.
What parts are used alongside the ESP32-DEVKIT-V1?
The mh-cd42, TB6612FNG, AMS1117-3.3, ESP32-CAM and L293D appear in the most repositories here.
Which microcontrollers do boards using the ESP32-DEVKIT-V1 use?
Most are built on ESP32 (114) and STM32 (2).
How big is a typical board using the ESP32-DEVKIT-V1?
The median is 92.4 × 80 mm, and 97% are two-layer designs.
What is the most popular open source board using the ESP32-DEVKIT-V1?
By GitHub stars, Edrumulus by corrados, with 159 stars.
Can I simulate one of these boards using the ESP32-DEVKIT-V1 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.