ErgoDone
About the ErgoDone PCB
ErgoDone is an open source PCB design by ktec-hq, published on GitHub under the GPL-3.0 license. It is a board measuring 182.8 × 158.9 mm, with 141 components from 59 distinct parts.
Other key parts include the ProMicro and MCP23017. By type, the board carries 82 diodes, 40 switches, 5 resistors, 4 connectors, 3 LEDs and 2 ICs.
From the project
ErgoDox using pro micro. Original work by Dox. Brainhole association present
Original work by Dox. K.T.E.C. present. # Lisence GPL v3
Main components on the ErgoDone
ErgoDone bill of materials (BOM)
141 components, 59 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ProMicro | ProMicro | U1 |
| 1 | MCP23017 | MCP23017 | U2 |
| 1 | USB | USBMINImod | J1 |
| 1 | 3.5mm | 4pin35mmAudio | J2 |
| 2 | JMP | 100PITCH1X3 | J3, J4 |
| 2 | STAB200 | STAB_PCB940 | S1, S2 |
| 1 | SW0:6 | MX_FLIP_DIODE_NOSMD | SW0:7 |
| 1 | SW0:5 | MX_FLIP_DIODE_NOSMD | SW0:8 |
| 1 | SW0:4 | MX_FLIP_DIODE_NOSMD | SW0:9 |
| 1 | SW0:3 | MX_FLIP_DIODE_NOSMD | SW0:10 |
| 1 | SW0:2 | MX_FLIP_DIODE_NOSMD | SW0:11 |
| 1 | SW0:1 | MX_FLIP_DIODE_NOSMD | SW0:12 |
| 1 | SW1:4 | MX_FLIP_DIODE_NOSMD | SW1:9 |
| 1 | SW1:3 | MX_FLIP_DIODE_NOSMD | SW1:10 |
| 1 | SW1:2 | MX_FLIP_DIODE_NOSMD | SW1:11 |
| 1 | SW1:1 | MX_FLIP_DIODE_NOSMD | SW1:12 |
| 1 | SW1:0 | MX_FLIP_DIODE_NOSMD | SW1:13 |
| 1 | SW2:6 | MX_FLIP_DIODE_NOSMD | SW2:7 |
| 1 | SW2:5 | MX_FLIP_DIODE_NOSMD | SW2:8 |
| 1 | SW2:4 | MX_FLIP_DIODE_NOSMD | SW2:9 |
Show 39 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SW2:3 | MX_FLIP_DIODE_NOSMD | SW2:10 |
| 1 | SW2:2 | MX_FLIP_DIODE_NOSMD | SW2:11 |
| 1 | SW2:1 | MX_FLIP_DIODE_NOSMD | SW2:12 |
| 1 | SW2:0 | MX_FLIP_XX_NOSMD | SW2:13 |
| 1 | SW3:5 | MX_FLIP_DIODE_NOSMD | SW3:8 |
| 1 | SW3:4 | MX_FLIP_DIODE_NOSMD | SW3:9 |
| 1 | SW3:3 | MX_FLIP_DIODE_NOSMD | SW3:10 |
| 1 | SW3:2 | MX_FLIP_DIODE_NOSMD | SW3:11 |
| 1 | SW3:1 | MX_FLIP_DIODE_NOSMD | SW3:12 |
| 1 | SW3:0 | MX_FLIP_XX_NOSMD | SW3:13 |
| 1 | SW4:6 | MX_FLIP_DIODE_NOSMD | SW4:7 |
| 1 | SW4:5 | MX_FLIP_DIODE_NOSMD | SW4:8 |
| 1 | SW4:4 | MX_FLIP_DIODE_NOSMD | SW4:9 |
| 1 | SW4:3 | MX_FLIP_DIODE_NOSMD | SW4:10 |
| 1 | SW4:2 | MX_FLIP_DIODE_NOSMD | SW4:11 |
| 1 | SW4:1 | MX_FLIP_DIODE_NOSMD | SW4:12 |
| 1 | SW4:0 | MX_FLIP_XX_NOSMD | SW4:13 |
| 1 | SW5:6 | MX_FLIP_DIODE_NOSMD | SW5:7 |
| 1 | SW5:5 | MX_FLIP_DIODE_NOSMD | SW5:8 |
| 1 | SW5:4 | MX_FLIP_DIODE_NOSMD | SW5:9 |
| 1 | SW5:3 | MX_FLIP_DIODE_NOSMD | SW5:10 |
| 1 | SW5:2 | MX_FLIP_DIODE_NOSMD | SW5:11 |
| 1 | SW5:1 | MX_FLIP_DIODE_NOSMD | SW5:12 |
| 1 | SW5:0 | MX_FLIP_XX_NOSMD | SW5:13 |
| 1 | SX0:3 | MX_FLIP | SX0:10 |
| 1 | SX0:2 | MX_FLIP | SX0:11 |
| 1 | SX1:6 | MX_FLIP | SX1:7 |
| 1 | SX1:5 | MX_FLIP | SX1:8 |
| 1 | LEDa | ERGO_LED-3MM | LED_A1 |
| 1 | LEDb | ERGO_LED-3MM | LED_B1 |
| 1 | LEDc | ERGO_LED-3MM | LED_C1 |
| 40 | DIODE | D_1206_L | D1, D3, D5, D7, D9, D11, D13, D15 +32 |
| 40 | DIODE | D_1206_R | D2, D4, D6, D8, D10, D12, D14, D16 +32 |
| 2 | DIODE | DIODE_SX | D81, D82 |
| 1 | 0.1uF | C_Disc_D6_P5 | C1 |
| 2 | 2.2kΩ | ERGO_RESISTOR | R1, R2 |
| 1 | LEDa | ERGO_RESISTOR | RA1 |
| 1 | LEDb | ERGO_RESISTOR | RB1 |
| 1 | LEDc | ERGO_RESISTOR | RC1 |
ErgoDone design files
The KiCad project lives in the ktec-hq/ErgoDone repository on GitHub; these links point at the commit this page was built from.
- LayoutErgoDone.kicad_pcb
ErgoDone: common questions
How big is the ErgoDone PCB?
The ErgoDone measures 182.8 × 158.9 mm and is 1.6002 mm thick.
How many components are on the ErgoDone?
141 components, from 59 distinct parts. The full bill of materials is listed on this page.
Where can I download the ErgoDone design files?
From the ktec-hq/ErgoDone repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the ErgoDone design in my own project?
Yes, under the terms of its GPL-3.0 license, which ktec-hq chose for the repository.