HardLabs

Abcdefg.kicad pcb saigooner

ktoniman·Solar-Tracker

Abcdefg.kicad pcb saigooner layout, top view — open source AVR/Arduino board by ktoniman

About the Abcdefg.kicad pcb saigooner

Abcdefg.kicad pcb saigooner is an open source AVR/Arduino PCB design by ktoniman, published on GitHub. It is a 4-layer board measuring 48.3 × 95.3 mm, with 31 components from 14 distinct parts.

Its main chip is the Arduino_Nano_Socket, from the AVR/Arduino family. Other key parts include the MT3608. By type, the board carries 12 capacitors, 6 resistors, 5 connectors, 3 diodes, 2 ICs and 2 inductors.

It belongs with the power & battery designs in this gallery.

From the project

Y1S1 project to be improved

Electrical Engineering Principles and Practices (E1111A) Project a Y1S1 project to be improved

If time allows, next pcb iteration using copper pours

Main components on the Abcdefg.kicad pcb saigooner

MT3608Arduino_Nano_Socket

Abcdefg.kicad pcb saigooner bill of materials (BOM)

31 components, 14 distinct parts — part numbers from the project's BOM.

QtyPartRefs
2
MT3608
U1, U2
1
Arduino_Nano_Socket
A1
1
Servo 1
J1
1
Servo 2
J2
2
Conn_01x02_Pin
J3, J5
1
Battery connector
J4
3
SS54
D1, D2, D3
1
4.7uH > 1.5 A
L1
1
4.7 uH > 2A
L2
4
22u
C1, C2, C5, C6
5
100n
C3, C8, C9, C10, C12
3
220u
C4, C7, C11
4
10k
R1, R2, R4, R6
2
75k
R3, R5

Abcdefg.kicad pcb saigooner design files

The KiCad project lives in the ktoniman/Solar-Tracker repository on GitHub; these links point at the commit this page was built from.

Abcdefg.kicad pcb saigooner: common questions

What microcontroller does the Abcdefg.kicad pcb saigooner use?

The Abcdefg.kicad pcb saigooner is built around the Arduino_Nano_Socket, from the AVR/Arduino family.

How big is the Abcdefg.kicad pcb saigooner?

The Abcdefg.kicad pcb saigooner measures 48.3 × 95.3 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Abcdefg.kicad pcb saigooner?

31 components, from 14 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Abcdefg.kicad pcb saigooner design files?

From the ktoniman/Solar-Tracker repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Abcdefg.kicad pcb saigooner design in my own project?

The repository has no license, so all rights stay with ktoniman. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Abcdefg.kicad pcb saigooner without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in Solar-Tracker

Similar boards