Noname
About the Noname PCB
Noname is an open source PCB design by kwan3217, published on GitHub under the GPL-2.0 license. It is a board, with 22 components from 21 distinct parts.
Other key parts include the FGPMMOPA6H. By type, the board carries 4 jumpers, 3 ICs, 2 capacitors, 2 resistors, 1 transistor and 1 crystal.
From the project
KiCad versions of my circuits
Many of my boards have the Open Source Hardware logo on them. Using this logo requires having an open source license and publishing the source. In order to support this, I have the URL of this repository engraved onto the boards themselves.
I have made a release for the Wearable Pocketometer boards, and intend to make a release each time I have a board made.
All boards which have been released since September 2020 have enough information to construct a bill of materials. This is in the form of Digikey part numbers attached to each part in the KiCad .sch files.
Main components on the Noname
Noname bill of materials (BOM)
22 components, 21 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | FGPMMOPA6H | FGPMMOPA6H | U1 |
| 1 | — | PCBFEAT-REV-040 | U$9 |
| 1 | — | ADAFRUIT_TEXT_20MM | U$11 |
| 1 | DMG3415U-7 | SOT23-WIDE | Q1 |
| 1 | uFL | U.FL | X1 |
| 1 | CR1220 | CR1220-2 | B1 |
| 1 | — | 1X04_ROUND | JP1 |
| 1 | — | 1X05_ROUND_70 | JP2 |
| 1 | — | 1X02_ROUND | JP3 |
| 1 | — | 1X10_ROUND | JP4 |
| 1 | FEATHERWING | FEATHERWING | MS1 |
| 1 | — | SOLDERJUMPER_ARROW_NOPASTE | SJ1 |
| 2 | — | SOLDERJUMPER_CLOSEDWIRE | SJ2, SJ3 |
| 1 | KMR2 | BTN_KMR2_4.6X2.8 | SW1 |
| 1 | — | TESTPOINT_ROUND_1.5MM | TP1 |
| 1 | RED | CHIPLED_0805_NOOUTLINE | LED1 |
| 1 | Ferrite | 0805-NO | FB1 |
| 1 | 0.1uF | 0805-NO | C1 |
| 1 | 10uF | 0805-NO | C2 |
| 1 | 470 ohm | 0805-NO | R1 |
Show 1 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 100K | 0805-NO | R2 |
Noname design files
The KiCad project lives in the kwan3217/kicad repository on GitHub; these links point at the commit this page was built from.
Noname: common questions
How many components are on the Noname?
22 components, from 21 distinct parts. The full bill of materials is listed on this page.
Where can I download the Noname design files?
From the kwan3217/kicad repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Noname design in my own project?
Yes, under the terms of its GPL-2.0 license, which kwan3217 chose for the repository.
More boards in kicad
AVR/ArduinoPrecision
76.2 × 76.2 mm156 parts2LGPL-2.02
NXPWearablePocketometer
66 × 38.1 mm81 parts2LGPL-2.02
NXPRocketometer6050
55.9 × 22.9 mm72 partsGPL-2.02
NXPLoginator pihat
65 × 56 mm65 parts2LGPL-2.02
NXPLoginator2148
61 × 38.1 mm57 partsGPL-2.02
AVR/ArduinoTomo
35.6 × 55.9 mm57 parts2LGPL-2.02
LoginatorM7
61 × 38.1 mm49 partsGPL-2.02
Shoulder
38.1 × 25.4 mm35 parts2LGPL-2.02
NXPPocket
66 × 38.1 mm31 parts2LGPL-2.02
Adafruit BNO055
26.7 × 20.3 mm25 partsGPL-2.02
GPSFeatherWing
50.8 × 22.9 mm22 partsGPL-2.02