Loginator2148

kwan3217·kicad·Loginator/Loginator2148.kicad_pcb

Loginator2148 PCB layout, top view — open source NXP board by kwan3217

About the Loginator2148 PCB

Loginator2148 is an open source NXP PCB design by kwan3217, published on GitHub under the GPL-2.0 license. It is a board measuring 61 × 38.1 mm, with 57 components from 38 distinct parts.

Its main chip is the LPC2148, from the NXP family. Other key parts include the 3.3V, MAX4173, MCP73831 and 1525. By type, the board carries 16 capacitors, 11 resistors, 9 connectors, 6 switches, 5 ICs and 4 jumpers.

From the project

KiCad versions of my circuits

Many of my boards have the Open Source Hardware logo on them. Using this logo requires having an open source license and publishing the source. In order to support this, I have the URL of this repository engraved onto the boards themselves.

I have made a release for the Wearable Pocketometer boards, and intend to make a release each time I have a board made.

All boards which have been released since September 2020 have enough information to construct a bill of materials. This is in the form of Digikey part numbers attached to each part in the KiCad .sch files.

Main components on the Loginator2148

Loginator2148 bill of materials (BOM)

57 components, 38 distinct parts.

QtyPartRefs
1
3.3V
U201
1
MAX4173
U202
1
MCP73831
U301
1
LPC2148
U401
1
1525
U402
1
PMOS
Q050
1
12MHz
Y401
1
USB_MICROB
J001
1
M01PTH
J002
1
JST 2mm
J301
2
M06
J401, J404
1
M04
J402
1
M10
J403
1
11DoF
J406
1
Micro_SD_Card_Det_Hirose_DM3AT
J701
4
STAND-OFF
JP1, JP2, JP3, JP4
3
SPST
S010, S420, S457
1
SPDT
S201
2
GS2
S401, S438
2
RED
D050, D301
Show 18 more
QtyPartRefs
1
DCC
D302
1
HSMF-C118
D401
1
18pF
C023
1
1uF
C201
8
100nF
C204, C407, C423, C432, C443, C451, C463, C701
1
4.7nF
C205
3
4.7uF
C301, C302, C438
2
18pF
C461, C462
1
22k
R011
1
10k
R015
2
33
R023, R419
1
1.5k
R035
1
100k
R201
1
0.047
R203
1
10k
R301
1
1.5k
R302
1
10k
R401
1
150
R433

Loginator2148 design files

The KiCad project lives in the kwan3217/kicad repository on GitHub; these links point at the commit this page was built from.

Loginator2148: common questions

What microcontroller does the Loginator2148 use?

The Loginator2148 is built around the LPC2148, from the NXP family.

How big is the Loginator2148 PCB?

The Loginator2148 measures 61 × 38.1 mm and is 1.6 mm thick.

How many components are on the Loginator2148?

57 components, from 38 distinct parts. The full bill of materials is listed on this page.

Where can I download the Loginator2148 design files?

From the kwan3217/kicad repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Loginator2148 design in my own project?

Yes, under the terms of its GPL-2.0 license, which kwan3217 chose for the repository.

Can I test firmware for the Loginator2148 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug NXP firmware against it before you order a PCB.

More boards in kicad

Similar boards