RP Podplesky Wall-E
Kybernetika-SPSE·RP_Podplesky_Wall-E·4. Ročník/ELEKTRO/PCB/PCB.kicad_pcb
About the RP Podplesky Wall-E PCB
RP Podplesky Wall-E is an open source PCB design by Kybernetika-SPSE, published on GitHub. It is a 2-layer board measuring 60 × 65 mm, with 14 components from 10 distinct parts.
By type, the board carries 11 connectors, 1 diode, 1 capacitor and 1 resistor.
It belongs with the robotics & motion designs in this gallery.
From the project
Ročníková práce Wall-E robot
RP Podplesky Wall-E bill of materials (BOM)
14 components, 10 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Conn_01x04 | PinSocket_1x04_P2.54mm_Vertical | J1 |
| 2 | Conn_01x08 | PinHeader_1x08_P2.54mm_Vertical | J3, J8 |
| 1 | Jetson Pinout | PinHeader_2x20_P2.54mm_Vertical | J11 |
| 3 | Screw_Terminal_01x02 | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J12, J13, J14 |
| 1 | Napajeni BTS_R | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J15 |
| 1 | Napajeni BTS_L | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J16 |
| 2 | Conn_01x04 | PinHeader_1x04_P2.54mm_Vertical | J17, J18 |
| 1 | LED | LED_D3.0mm | D1 |
| 1 | 1000uF / 35V | CP_Radial_D10.0mm_P5.00mm | C1 |
| 1 | 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
RP Podplesky Wall-E design files
The KiCad project lives in the Kybernetika-SPSE/RP_Podplesky_Wall-E repository on GitHub; these links point at the commit this page was built from.
RP Podplesky Wall-E: common questions
How big is the RP Podplesky Wall-E PCB?
The RP Podplesky Wall-E measures 60 × 65 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the RP Podplesky Wall-E?
14 components, from 10 distinct parts. The full bill of materials is listed on this page.
Where can I download the RP Podplesky Wall-E design files?
From the Kybernetika-SPSE/RP_Podplesky_Wall-E repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the RP Podplesky Wall-E design in my own project?
The repository has no license, so all rights stay with Kybernetika-SPSE. Use it as a reference, and ask the author before reusing the design.
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1kTrollerv2
rene-dev
100 × 75 mm33 parts4LGPL-3.0979Powerstep
rene-dev
95.2 × 71.5 mm28 parts4LGPL-3.097911ua
rene-dev
57.3 × 19 mm26 parts2LGPL-3.0979Diff driver
rene-dev
32 × 22 mm14 parts2LGPL-3.0979