Pinpoint timebase
lab11·polypoint·pcb/pinpoint/pinpoint_timebase/pinpoint_timebase.kicad_pcb
About the Pinpoint timebase PCB
Pinpoint timebase is an open source STM32 PCB design by lab11, published on GitHub under the Apache-2.0 license. It is a 4-layer board measuring 80 × 78.7 mm, with 70 components from 26 distinct parts.
Its main chip is the STM32F031G4U6, from the STM32 family. Other key parts include the SN74AVC1T45, 551S, ICS8545, AOZ1282CI and SI5317. By type, the board carries 30 capacitors, 16 connectors, 11 ICs, 10 resistors, 1 diode and 1 inductor.
It belongs with the iot & wireless designs in this gallery.
From the project
Indoor localization based on the DecaWave DW1000.
The PolyPoint system consists of several PCBs centered around TriPoint, the core UWB ranging module.
1. TriPoint: Triangular module which contains all necessary hardware for using the DecaWave DW1000. It has castellated headers so it can be soldered onto a carrier board to add indoor localization functionality to any device.
2. TriTag: Portable carrier board designed to be used as an indoor localization tag. Has TriPoint on one side and a BLE radio on the other.
Main components on the Pinpoint timebase
Pinpoint timebase bill of materials (BOM)
70 components, 26 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SN74AVC1T45 | SC-70-6 | U1 |
| 2 | 551S | SOIC-8_3.9x4.9mm_Pitch1.27mm | U2, U10 |
| 2 | ICS8545 | TSSOP-20_4.4x6.5mm_Pitch0.65mm | U3, U9 |
| 1 | AOZ1282CI | SOT-23-6 | U4 |
| 1 | SI5317 | QFN-36_1EP_6x6mm | U5 |
| 1 | 7N-XX.XXXMBP-T | 7N-xx.xxxMBP-T | U6 |
| 1 | STM32F031G4U6 | UFQFPN-28 | U7 |
| 1 | 830S21 | SOIC-8_3.9x4.9mm_Pitch1.27mm | U8 |
| 1 | NCP1117 | SOT-223 | U11 |
| 1 | BARREL_JACK | BARREL_JACK | CON1 |
| 5 | RJ45 | RJ45_8 | J1, J2, J3, J4, J5 |
| 1 | TC2030-JLINK-NL | TC2030 | J6 |
| 2 | CONN_01X03 | Pin_Header_Straight_1x03 | P1, P6 |
| 7 | SMA | SMA_EDGE | P2, P3, P4, P5, P8, P9, P10 |
| 1 | SMA | SMA_EDGE | eP7 |
| 1 | D_Schottky | SOD-323 | D1 |
| 1 | 22uH | NR6045 | L1 |
| 27 | 0.1uF | C_0402 | C1, C2, C3, C4, C5, C6, C7, C8 +19 |
| 1 | 4.7uF | C_0805 | C20 |
| 2 | 10uF | C_0805 | C21, C22 |
Show 6 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | R_Small | R_0402 | R1, R2, R6, R7 |
| 2 | 150 | R_0402 | R3, R4 |
| 1 | 130 | R_0402 | R5 |
| 1 | 4.7K | R_0402 | R8 |
| 1 | 49.9K | R_0402 | R9 |
| 1 | 9.53K | R_0402 | R10 |
Pinpoint timebase design files
The KiCad project lives in the lab11/polypoint repository on GitHub; these links point at the commit this page was built from.
Pinpoint timebase: common questions
What microcontroller does the Pinpoint timebase use?
The Pinpoint timebase is built around the STM32F031G4U6, from the STM32 family.
How big is the Pinpoint timebase PCB?
The Pinpoint timebase measures 80 × 78.7 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Pinpoint timebase?
70 components, from 26 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Pinpoint timebase design files?
From the lab11/polypoint repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Pinpoint timebase design in my own project?
Yes, under the terms of its Apache-2.0 license, which lab11 chose for the repository.
Can I test firmware for the Pinpoint timebase without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in polypoint
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k