17 open source boards using the NCP1117
Real designs built with the NCP1117, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
Finalgrom99
endlos99
100.2 × 63.1 mm29 parts2LGPL-3.094AVR/Arduino
Keyboard
nicola-strappazzon
230 × 96 mm164 parts2LNo license19Ch224baseProdt
SdtElectronics
61.8 × 18.5 mm36 parts2LCERN-OHL-W-2.013STM32
Stm32-board
facens-omegabotz
66 × 26 mm27 parts2LApache-2.03STM32
Blackmagic clone
sergiomd4
43.6 × 27 mm41 parts2LCC0-1.01- schematic only · 34 partsESP32
SentinelEye-AI-Powered-Wearable-Drowsiness-Detection-System for-Soldier-Safety
aboutharshith17-cpu
34 partsMIT1 AVR/Arduino
Ornament2021
JamesMorrisELCT
149.5 × 149.7 mm131 parts2LNo license0AVR/Arduino
ATmega328 control Board
olexsu
124 × 89.4 mm129 parts4LMIT0FPGA
Digitizer-1
chew-in
50 × 100 mm77 parts4LNo license0ESP8266
Control
adamgreig
100 × 40 mm70 parts2LNo license0RP2040/RP2350
Shaurydino-V1
GodOfStrategy
62.7 × 53.5 mm33 parts2LNo license0Board
awkwardbunny
96.8 × 80.9 mm30 parts2LGPL-3.00STM32
Pinpoint timebase
lab11
80 × 78.7 mm70 parts4LApache-2.0144Ch224base
SdtElectronics
50.9 × 18.5 mm35 parts2LCERN-OHL-W-2.013AVR/Arduino
ArduinoController
frep
150 × 80 mm100 parts2LNo license2STM32
Dsp
cillian64
50 × 50 mm43 parts2LNo license2STM32
Unified
ervanalb
48.3 × 20.3 mm39 parts4LNo license8
How designs wire the NCP1117
Read from the KiCad layouts of 14 open source designs, one per repository: what each pin of the NCP1117 connects to, and the resistors, capacitors and other passives placed on it.
- The VO pin has a decoupling capacitor on 10 of 13 designs, most often 100 nF (then 10 µF).
- The VI pin has a decoupling capacitor on 10 of 14 designs, most often 10 µF (then 82 µF).
- The OUT pin has a capacitor to GND on 3 of 5 designs, most often 100 nF (then 10 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1 | Connected to: GND 100% | — |
| VOpin 2 | Connected to: 3.3V 62% · a signal 38% |
|
| VIpin 3 | Connected to: VBUS 86% |
|
| OUTpin 4 | Connected to: Not connected 40% · 3.3V 40% · a signal 20% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Pinpoint timebase by lab11, Finalgrom99 by endlos99, Keyboard by nicola-strappazzon and Ch224base by SdtElectronics.
The NCP1117 in open source designs
The gallery holds 17 open source boards using the NCP1117 from 16 GitHub repositories; a typical one measures about 73 × 58.3 mm and carries around 41 components.
75% are two-layer designs, the rest use four layers or more, and 53% carry an open source license.
The most starred is Pinpoint timebase by lab11.
Microcontrollers on boards using the NCP1117
What boards using the NCP1117 are built for
NCP1117: common questions
Where can I find a NCP1117 reference design?
Each of the 17 boards on this page is a real design using the NCP1117. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the NCP1117 VO pin?
The VO pin has a decoupling capacitor on 10 of 13 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 14 open source designs using the NCP1117.
What decoupling capacitors do designs use on the NCP1117 VI pin?
The VI pin has a decoupling capacitor on 10 of 14 designs, most often 10 µF (then 82 µF). Counted from the KiCad layouts of 14 open source designs using the NCP1117.
How is the NCP1117 OUT pin connected?
The OUT pin has a capacitor to GND on 3 of 5 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 14 open source designs using the NCP1117.
Which microcontrollers do boards using the NCP1117 use?
Most are built on AVR/Arduino (5), STM32 (5), ESP32 (1) and ESP8266 (1).
How big is a typical board using the NCP1117?
The median is 73 × 58.3 mm, and 75% are two-layer designs.
What is the most popular open source board using the NCP1117?
By GitHub stars, Pinpoint timebase by lab11, with 144 stars.
Can I simulate one of these boards using the NCP1117 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.