FRDM-MCXN947 + SX1255
labdvm·Phenix-1255-HW
About the FRDM-MCXN947 + SX1255 PCB
FRDM-MCXN947 + SX1255 is an open source PCB design by labdvm, published on GitHub under the CERN-OHL-P-2.0 license. It is a 2-layer board measuring 118 × 55 mm, with 64 components from 30 distinct parts.
Other key parts include the SX1255IWLTRTCT-ND and MCP1703T-3302E/DBCT-ND. By type, the board carries 30 resistors, 17 capacitors, 5 diodes, 3 inductors, 2 ICs and 2 crystals.
It belongs with the dev boards & breakouts and displays & leds designs in this gallery.
From the project
SX1255 HAT for FRDM-MCXN947
Phenix-1255 is a shield board that pairs the popular Semtech SX1255 RF transceiver with the NXP FRDM-MCXN947 development board — no Raspberry Pi required. The MCX N947 handles the I/Q sample stream and talks to the host PC over High-Speed USB or Ethernet.
The project idea comes from DM5LF, who also writes the software. The hardware was designed by Z32IT.
- Separate RX and TX paths with U.FL connectors - RX: SAW band-pass filter (TDK B3909) - TX: low-pass filter (Mini-Circuits LFCN-490+) - Power supply – 3.3 V LDO (MCP1703), ferrite-bead filtering, resettable 500 mA fuse, TVS diode array…

Main components on the FRDM-MCXN947 + SX1255
FRDM-MCXN947 + SX1255 bill of materials (BOM)
64 components, 30 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SX1255IWLTRTCT-ND SX1255 Semtech Corporation | QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm_ThermalVias | IC1 |
| 1 | MCP1703T-3302E/DBCT-ND MCP1703Ax-330xxDB Microchip Technology | SOT-223-3_TabPin2 | U1 |
| 1 | 3372-BSS84TR-ND BSS84 MDD | SOT-23 | Q1 |
| 1 | B39431B3909U410-ND B3909 Qualcomm (RF front-end (RFFE) filters) | Filter_SAW_Epcos_DCC6C_3x3mm | X1 |
| 1 | 114-TG2520SMN38.4000M-MCGNNM3CT-ND 38.4MHz EPSON | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 343-CONMHF1-SMD-G-TCT-ND RX TE Connectivity Linx | U.FL_Molex_MCRF_73412-0110_Vertical | J5 |
| 1 | 343-CONMHF1-SMD-G-TCT-ND TX TE Connectivity Linx | U.FL_Molex_MCRF_73412-0110_Vertical | J6 |
| 1 | 500MA 500mA Littelfuse Inc. | Fuse_0805_2012Metric | F1 |
| 1 | 3157-LFCN-490+CT-ND LFCN-490 Mini-Circuits | Filter_Mini-Circuits_FV1206 | FL1 |
| 1 | 160-LTST-T180UWETCT-ND PWR Lite-On Inc. | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1 |
| 1 | 160-1479-1-ND Err Lite-On Inc. | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D2 |
| 1 | 160-1437-1-ND Warn Lite-On Inc. | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D3 |
| 1 | 754-APT1608SGD3CT-ND Good Kingbright | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D4 |
| 1 | SP0502BAHT Littelfuse Inc. | SOT-23-3 | D5 |
| 1 | 490-1046-1-ND 600 ohm/100MHz Murata Electronics | L_0805_2012Metric | L1 |
| 1 | 490-LQW18AS82NG00DCT-ND 82n Murata Electronics | L_0603_1608Metric | L2 |
| 1 | 490-LQW18AS39NG00DCT-ND 39n Murata Electronics | L_0603_1608Metric | L3 |
| 5 | 311-3484-1-ND 1u YAGEO | C_0603_1608Metric | C1, C3, C9, C13, C15 |
| 2 | 1276-3148-1-ND 22u Samsung Electro-Mechanics | C_0805_2012Metric | C2, C5 |
| 1 | 399-14932-1-ND 10p KEMET | C_0603_1608Metric | C4 |
Show 10 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 6 | 720-1688-1-ND 100n Vishay Vitramon | C_0603_1608Metric | C6, C7, C8, C12, C14, C17 |
| 1 | 399-C0603C103K8RACTUCT-ND 10n KEMET | C_0603_1608Metric | C10 |
| 2 | 399-15348-1-ND 100p KEMET | C_0603_1608Metric | C11, C16 |
| 4 | 541-10.0KHCT-ND 10K Vishay Dale | R_0603_1608Metric | R1, R18, R19, R20 |
| 3 | 541-1.00HHCT-ND 1R Vishay Dale | R_0603_1608Metric | R2, R9, R26 |
| 10 | 541-33.0HCT-ND 33R Vishay Dale | R_0603_1608Metric | R3, R4, R8, R11, R14, R15, R16, R17 +2 |
| 7 | 541-330HCT-ND 330R Vishay Dale | R_0603_1608Metric | R5, R6, R7, R10, R12, R13, R25 |
| 1 | 541-3.30KHCT-ND 3K3 Vishay Dale | R_0603_1608Metric | R21 |
| 3 | 541-1.5KGCT-ND 1K5 Vishay Dale | R_0603_1608Metric | R22, R23, R24 |
| 2 | 541-1.00MHCT-ND 1M Vishay Dale | R_0603_1608Metric | R27, R28 |
FRDM-MCXN947 + SX1255 design files
The KiCad project lives in the labdvm/Phenix-1255-HW repository on GitHub; these links point at the commit this page was built from.
FRDM-MCXN947 + SX1255: common questions
How big is the FRDM-MCXN947 + SX1255 PCB?
The FRDM-MCXN947 + SX1255 measures 118 × 55 mm, has 2 copper layers and is 1.2 mm thick.
How many components are on the FRDM-MCXN947 + SX1255?
64 components, from 30 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the FRDM-MCXN947 + SX1255 design files?
From the labdvm/Phenix-1255-HW repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the FRDM-MCXN947 + SX1255 design in my own project?
Yes, under the terms of its CERN-OHL-P-2.0 license, which labdvm chose for the repository.
Similar boards
BM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kView base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kDisplay eval
byrantech
52.1 × 22.6 mm12 parts4LMIT4.3kChainlinkBase
scottbez1
98.4 × 190.5 mm119 parts2LApache-2.04.2k