HardLabs

Open agent micropad rev a

Lamdevelopper·my_codex_micropad·PCB_files/open_agent_micropad_rev_a.kicad_pcb

Open agent micropad rev a PCB layout, top view — open source RP2040/RP2350 board by Lamdevelopper

About the Open agent micropad rev a PCB

Open agent micropad rev a is an open source RP2040/RP2350 PCB design by Lamdevelopper, published on GitHub. It is a 2-layer board measuring 118 × 86 mm, with 29 components from 18 distinct parts.

Its main chip is the RP2040 USB-C PRO MICRO MODULE - SELECT MPN, from the RP2040/RP2350 family. By type, the board carries 14 switches, 13 LEDs, 1 IC and 1 connector.

It belongs with the keyboards designs in this gallery.

From the project

For Hackclub Keeb proyect (If you'r an Open AI employee pleasse send me one of the codex micropadd (thank you so much))

This KiCad board is a mechanical placement study, not a fabrication release.

- Board maximum: 118 x 86 x 1.6 mm, R5 corners. - Thirteen physical MX switch centres use the layout from Documents/CADPCBDimensionalPlan.md. - The 2U Push-to-Talk control is SW11 + SW12 at a 19.05 mm pitch; firmware combines them as one logical action. - Four M2.5 support holes have a preliminary 2.8 mm` clearance. - The board reserves the selected families: MX switch, reverse-mount RGB, EC11 encoder, ALPS RKJXV joystick, and a 34 x 18 mm RP2040 Pro Micro-style USB-C module. The RP2040 envelope has 1.5 mm of…

Main components on the Open agent micropad rev a

RP2040 USB-C PRO MICRO MODULE - SELECT MPN

Open agent micropad rev a bill of materials (BOM)

29 components, 18 distinct parts.

QtyPartRefs
1
RP2040 USB-C PRO MICRO MODULE - SELECT MPN
U1
1
ALPS RKJXV WITH PUSH (SELECT EXACT MPN)
J1
1
AGENT_1
SW1
1
AGENT_2
SW2
1
AGENT_3
SW3
1
AGENT_4
SW4
1
AGENT_5
SW5
1
AGENT_6
SW6
1
FAST
SW7
1
APPROVE
SW8
1
REJECT_STOP
SW9
1
CONTINUE
SW10
1
PTT_LEFT
SW11
1
PTT_RIGHT
SW12
1
NEW_SESSION
SW13
1
EC11 WITH SWITCH (SELECT EXACT MPN)
SW14
1
SK6812MINI-E (SELECT MPN)
LED1
12
SK6812MINI-E
LED2, LED3, LED4, LED5, LED6, LED7, LED8, LED9 +4

Open agent micropad rev a design files

The KiCad project lives in the Lamdevelopper/my_codex_micropad repository on GitHub; these links point at the commit this page was built from.

Open agent micropad rev a: common questions

What microcontroller does the Open agent micropad rev a use?

The Open agent micropad rev a is built around the RP2040 USB-C PRO MICRO MODULE - SELECT MPN, from the RP2040/RP2350 family.

How big is the Open agent micropad rev a PCB?

The Open agent micropad rev a measures 118 × 86 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Open agent micropad rev a?

29 components, from 18 distinct parts. The full bill of materials is listed on this page.

Where can I download the Open agent micropad rev a design files?

From the Lamdevelopper/my_codex_micropad repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Open agent micropad rev a design in my own project?

The repository has no license, so all rights stay with Lamdevelopper. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Open agent micropad rev a without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in my_codex_micropad

Similar boards