Hand tile unrouted

latintzar·tactile-glove·hardware/glove-v4/interfaces/hand-tile/hand-tile-unrouted.kicad_pcb

Hand tile unrouted PCB layout, top view — open source board by latintzar

About the Hand tile unrouted PCB

Hand tile unrouted is an open source PCB design by latintzar, published on GitHub under the MIT license. It is a 2-layer board measuring 16 × 16 mm, with 7 components from 5 distinct parts.

Other key parts include the ISM330DHCXTR. By type, the board carries 3 capacitors, 2 resistors, 1 IC and 1 connector.

It belongs with the robotics & motion, iot & wireless and wearables designs in this gallery.

From the project

A sensing-glove design for recording hand contact, vibration and video.

Open the local design viewer to inspect the cuff, or follow the assembly guide. This public package preserves the engineering source and dated checks; current status identifies the remaining physical and manufacturing work.

This is the current complete-camera design. The V3 tactile circuits and glove laminate are retained inside V4; V3 manufacturing files describe the earlier camera-free board.

Main components on the Hand tile unrouted

Hand tile unrouted bill of materials (BOM)

7 components, 5 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ISM330DHCXTR
U1
1
SM04B-SRSS-TB(LF)(SN)
J1
2
GRM188R71C104KA01D
C1, C2
1
GRM188R61A475KE15D
C3
2
RC0603FR-0722RL
R1, R2

Hand tile unrouted design files

The KiCad project lives in the latintzar/tactile-glove repository on GitHub; these links point at the commit this page was built from.

Hand tile unrouted: common questions

How big is the Hand tile unrouted PCB?

The Hand tile unrouted measures 16 × 16 mm, has 2 copper layers and is 0.8 mm thick.

How many components are on the Hand tile unrouted?

7 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Hand tile unrouted design files?

From the latintzar/tactile-glove repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Hand tile unrouted design in my own project?

Yes, under the terms of its MIT license, which latintzar chose for the repository.

More boards in tactile-glove

Similar boards