HardLabs

Rfid attendance

LeafCodes·esp32s3-rfid-attendance·pcb/rfid-attendance/rfid-attendance.kicad_pcb

Rfid attendance PCB layout, top view — open source ESP32 board by LeafCodes

About the Rfid attendance PCB

Rfid attendance is an open source ESP32 PCB design by LeafCodes, published on GitHub. It is a 2-layer board measuring 100 × 80 mm, with 5 components from 5 distinct parts.

Its main chip is the ESP32-S3_DevKitC-1, from the ESP32 family. By type, the board carries 3 connectors and 2 diodes.

From the project

Local-First & Offline-Resilient RFID Attendance System built with ESP32-S3, PlatformIO, Custom KiCad PCB, and FastAPI Backend.

Direktori ini berisi seluruh berkas desain perangkat keras (hardware design files) sistem presensi RFID berbasis mikrokontroler ESP32-S3 yang dirancang menggunakan perangkat lunak KiCad 8.0.

Papan dirancang sesuai standar fabrikasi industri 2-layer (double-sided) yang ekonomis dan mudah diproduksi massal:

Komponen dirancang dominan menggunakan tipe Through-Hole Technology (THT) agar sangat mudah disolder secara manual oleh teknisi, mahasiswa, maupun hobiis:

Rfid attendance bill of materials (BOM)

5 components, 5 distinct parts.

QtyPartRefs
1
ESP32-S3_DevKitC-1
J1
1
MFRC522_RFID
J2
1
LCD_16x2_I2C
J3
1
LED_HIJAU
D1
1
LED_MERAH
D2

Rfid attendance design files

The KiCad project lives in the LeafCodes/esp32s3-rfid-attendance repository on GitHub; these links point at the commit this page was built from.

Rfid attendance: common questions

What microcontroller does the Rfid attendance use?

The Rfid attendance is built around the ESP32-S3_DevKitC-1, from the ESP32 family.

How big is the Rfid attendance PCB?

The Rfid attendance measures 100 × 80 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Rfid attendance?

5 components, from 5 distinct parts. The full bill of materials is listed on this page.

Where can I download the Rfid attendance design files?

From the LeafCodes/esp32s3-rfid-attendance repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Rfid attendance design in my own project?

The repository has no license, so all rights stay with LeafCodes. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Rfid attendance without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in esp32s3-rfid-attendance

Similar boards