STM32F405RGT6
lehaihv·KiCad·STM32F405RGT6/STM32F405RGT6/STM32F405RGT6.kicad_pcb
About the STM32F405RGT6 PCB
STM32F405RGT6 is an open source STM32 PCB design by lehaihv, published on GitHub. It is a 2-layer board measuring 66 × 42 mm, with 29 components from 22 distinct parts.
Its main chip is the STM32F405RGT6, from the STM32 family. Other key parts include the USBLC6-2SC6. By type, the board carries 12 capacitors, 6 resistors, 5 connectors, 2 ICs, 1 crystal and 1 switch.
From the project
Working projects with Kicad
Main components on the STM32F405RGT6
STM32F405RGT6 bill of materials (BOM)
29 components, 22 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F405RGT6 | LQFP-64_10x10mm_P0.5mm | U1 |
| 1 | USBLC6-2SC6 | SOT-23-6 | U2 |
| 1 | 16MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | Screw_Terminal_01x03 | TerminalBlock_Phoenix_PT-1,5-3-5.0-H_1x03_P5.00mm_Horizontal | J1 |
| 1 | SWD | PinSocket_2x05_P1.27mm_Vertical | J2 |
| 1 | I2C1 | Molex_PicoBlade_53048-0410_1x04_P1.25mm_Horizontal | J3 |
| 1 | USART3 | Molex_PicoBlade_53048-0410_1x04_P1.25mm_Horizontal | J4 |
| 1 | USB_B_Micro | USB_Micro-B_Amphenol_10118193-0002LF_Horizontal | J5 |
| 1 | SW_SPDT | SW_SPDT_PCM12 | SW1 |
| 1 | LED_Small | LED_0603_1608Metric | D1 |
| 1 | 39n | L_0402_1005Metric | L1 |
| 2 | 2u2 | C_0603_1608Metric | C1, C2 |
| 1 | 4u7 | C_0603_1608Metric | C3 |
| 5 | 100n | C_0402_1005Metric | C4, C5, C6, C7, C8 |
| 1 | 1n | C_0402_1005Metric | C9 |
| 1 | 10n | C_0603_1608Metric | C10 |
| 2 | 12p | C_0402_1005Metric | C11, C12 |
| 1 | 10k | R_0603_1608Metric | R1 |
| 1 | 47 | R_0603_1608Metric | R2 |
| 1 | 1k5 | R_0603_1608Metric | R3 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 22 | R_0603_1608Metric | R4 |
| 2 | 2K2 | R_0603_1608Metric | R5, R6 |
STM32F405RGT6 design files
The KiCad project lives in the lehaihv/KiCad repository on GitHub; these links point at the commit this page was built from.
STM32F405RGT6: common questions
What microcontroller does the STM32F405RGT6 use?
The STM32F405RGT6 is built around the STM32F405RGT6, from the STM32 family.
How big is the STM32F405RGT6 PCB?
The STM32F405RGT6 measures 66 × 42 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the STM32F405RGT6?
29 components, from 22 distinct parts. The full bill of materials is listed on this page.
Where can I download the STM32F405RGT6 design files?
From the lehaihv/KiCad repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the STM32F405RGT6 design in my own project?
The repository has no license, so all rights stay with lehaihv. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the STM32F405RGT6 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in KiCad
PWM Led
lehaihv
22.7 × 21.8 mm13 parts2LNo license0AVR/Arduino
Attiny85 USB panel
lehaihv
110.1 × 83.3 mm12 parts2LNo license0AVR/Arduino
Attiny85 USB
lehaihv
54.2 × 12.2 mm12 parts2LNo license0- schematic only · 12 partsESP32
QPCR Module
lehaihv
12 parts2LNo license0 ESP32
QPCR Controller Board
lehaihv
39.1 × 15.7 mm5 parts2LNo license0
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k