HardLabs

Project-2

lenhatthanh20·project-2·Hardware/schematic/allegro/pstxnet.dat

This repository ships a schematic but no board layout.
Simulate this board

About the Project-2 PCB

Project-2 is an open source TI MSP430/CC PCB design by lenhatthanh20, published on GitHub. It is a board, with 1 components from 1 distinct parts.

Its main chip is the CC3200MODR1M2AMOBT, from the TI MSP430/CC family.

From the project

Smart Medicine Box

Main components on the Project-2

CC3200MODR1M2AMOBT

Project-2 bill of materials (BOM)

1 components, 1 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
CC3200MODR1M2AMOBT
Texas Instruments
U1

Project-2 design files

The KiCad project lives in the lenhatthanh20/project-2 repository on GitHub; these links point at the commit this page was built from.

Project-2: common questions

What microcontroller does the Project-2 use?

The Project-2 is built around the CC3200MODR1M2AMOBT, from the TI MSP430/CC family.

How many components are on the Project-2?

1 components, from 1 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Project-2 design files?

From the lenhatthanh20/project-2 repository on GitHub, which has a netlist and the BOM; the links under Design files point to each one.

Can I use the Project-2 design in my own project?

The repository has no license, so all rights stay with lenhatthanh20. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Project-2 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug TI MSP430/CC firmware against it before you order a PCB.

Similar boards