Luminas
leobeo-png·Luminas·sch/sch.kicad_pcb
About the Luminas PCB
Luminas is an open source STM32 PCB design by leobeo-png, published on GitHub. It is a 2-layer board measuring 65.3 × 110 mm, with 72 components from 29 distinct parts.
Its main chip is the STM32F411R_C-E_Tx, from the STM32 family. Other key parts include the MPR121QR2, PCA9548ADB, AMS1117-3.3, SN74LV1T34DBV and USBLC6-2SC6. By type, the board carries 24 resistors, 19 capacitors, 7 connectors, 6 ICs, 5 diodes and 1 crystal.
From the project
Rhythm game controller development
Main components on the Luminas
Luminas bill of materials (BOM)
72 components, 29 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MPR121QR2 | UQFN-20_3x3mm_P0.4mm | U1 |
| 1 | STM32F411R_C-E_Tx | LQFP-64_10x10mm_P0.5mm | U2 |
| 1 | PCA9548ADB | TSSOP-24_4.4x7.8mm_P0.65mm | U3 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U4 |
| 1 | SN74LV1T34DBV | SOT-23-5 | U5 |
| 1 | USBLC6-2SC6 | SOT-23-6 | U6 |
| 1 | 25MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm_HandSoldering | Y1 |
| 1 | USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
| 1 | Conn_01x04_Pin | PinHeader_1x04_P2.54mm_Vertical | J2 |
| 2 | Conn_01x06 | Conn_Solder_I2C | J3, J4 |
| 1 | Conn_01x06_Socket | PinHeader_1x06_P2.54mm_Vertical | J5 |
| 2 | Conn_01x01 | Solder_3P | J6, J7 |
| 8 | Conn_01x01 | ChuKey | KEY1, KEY2, KEY3, KEY4, KEY5, KEY6, KEY7, KEY8 |
| 1 | SW_SPST | SW_SPST_TS-1088-xR025 | SW1 |
| 1 | RED | LED_0201_0603Metric | D1 |
| 4 | WS2812B | LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D2, D3, D4, D5 |
| 1 | 120R | L_0603_1608Metric | FB1 |
| 1 | 10u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1 |
| 11 | 100n | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C3, C4, C5, C6, C10, C11, C16 +3 |
| 1 | 10n | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C7 |
Show 9 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 1u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C8, C9 |
| 2 | 33p | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C12, C13 |
| 2 | 22u | C_0805_2012Metric | C14, C15 |
| 12 | 0 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3, R4, R11, R12, R15, R17 +4 |
| 1 | 10K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5 |
| 2 | 5.1K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6, R8 |
| 1 | 75K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7 |
| 7 | 2k2 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R9, R10, R13, R14, R16, R22, R23 |
| 1 | 1k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R24 |
Luminas design files
The KiCad project lives in the leobeo-png/Luminas repository on GitHub; these links point at the commit this page was built from.
- Layoutsch/sch.kicad_pcb
- Schematicsch/sch.kicad_sch
Luminas: common questions
What microcontroller does the Luminas use?
The Luminas is built around the STM32F411R_C-E_Tx, from the STM32 family.
How big is the Luminas PCB?
The Luminas measures 65.3 × 110 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Luminas?
72 components, from 29 distinct parts. The full bill of materials is listed on this page.
Where can I download the Luminas design files?
From the leobeo-png/Luminas repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Luminas design in my own project?
The repository has no license, so all rights stay with leobeo-png. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Luminas without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k