23 open source boards using the MPR121QR2
Real designs built with the MPR121QR2, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Nest mini drop in
iMike78
74.5 × 70.6 mm243 parts4LCERN-OHL-S-2.0598ESP32
Home mini v1-drop in
iMike78
72.4 × 70 mm223 parts4LCERN-OHL-S-2.0408RP2040/RP2350
Project athena
reading-hackspace
100 × 100 mm77 parts2LNo license3ESP32
OSCD Demo
tmjnijssen
94.6 × 94.6 mm76 parts4LCERN-OHL-P-2.03ESP32
EmbeddedKeyboard
01binary
143.2 × 105.8 mm108 parts4LNo license2ESP32
Kami hardware
Nicolai-Electronics
95 × 86 mm100 parts4LCERN-OHL-P-2.02ESP32
Nest mini v2-voice
marceldale
74.5 × 70.6 mm231 parts4LCERN-OHL-S-2.01Compact tablet
CopperPilot
28 × 125 mm385 parts8LCERN-OHL-S-2.00ESP32
Pet climate control
Yuan-Quan
217.2 × 95.3 mm218 parts2LNo license0AVR/Arduino
Chessconnect
K-0hm
396.3 × 336.1 mm196 parts2LGPL-3.00RP2040/RP2350
Lightclock
Anvarys
133 × 133 mm191 parts2LNo license0ESP32
Opentouch s3
JoeMighty
100 × 90 mm145 parts4LCustom license0Nordic nRF
MSBE V3
Monty103
49.3 × 60.1 mm88 parts4LNo license0STM32
Luminas
leobeo-png
65.3 × 110 mm72 parts2LNo license0ESP32
Aeropod2
eyendamuri
41 × 90.2 mm66 parts4LNo license0NXP
SeniorProject
Quasardilla
32.8 × 51 mm20 parts2LNo license0AVR/Arduino
Chessconnect uP
K-0hm
100 × 100 mm88 parts2LGPL-3.00Nordic nRF
MSBE V3 BGA
Monty103
55.9 × 8.7 mm85 parts4LNo license0ESP32
Esp32 mpr121
HeyPCB
30 × 48 mm27 parts4LCERN-OHL-S-2.00Edge-AI-Badge Face
LyndLabs
78 × 78 mm4 parts2LNo license1Nordic nRF
MSBE V3 BGA 6-layer
Monty103
55.9 × 8.7 mm85 parts6LNo license0RP2040/RP2350
RLab Keyboard
RADARC
100 × 100 mm66 parts2LNo license0Kicad test redo w MPR121
maxsterl666
160 × 180 mm47 parts4LNo license0
How designs wire the MPR121QR2
Read from the KiCad layouts of 20 open source designs, one per repository: what each pin of the MPR121QR2 connects to, and the resistors, capacitors and other passives placed on it.
- The VREG pin has a capacitor to GND on 19 of 20 designs, most often 100 nF (then 1 µF).
- The REXT pin has a resistor to GND on 19 of 20 designs, most often 75 kΩ (then 200 kΩ).
- The VDD pin has a decoupling capacitor on 18 of 20 designs, most often 100 nF (then 1 µF).
- The SCL pin has a pull-up to 3.3V on 14 of 20 designs, most often 4.7 kΩ (then 2.2 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| IRQpin 1 | Connected to: The microcontroller 60% |
|
| SCLpin 2 | Connected to: The microcontroller 65%, a connector 35% |
|
| SDApin 3 | Connected to: The microcontroller 65%, a connector 35% |
|
| ADDRpin 4 | Connected to: GND 75% · a signal 20% | — |
| VREGpin 5 | Connected to: Signal 90% |
|
| VSSpin 6 | Connected to: GND 100% | — |
| REXTpin 7 | Connected to: Signal 95% |
|
| VDDpin 20 | Connected to: 3.3V 100% |
|
12 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Nest mini drop in pcb by iMike78, Home mini v1-drop in pcb by iMike78, Project athena by reading-hackspace and OSCD Demo by tmjnijssen.
The MPR121QR2 in open source designs
The gallery holds 23 open source boards using the MPR121QR2 from 20 GitHub repositories; a typical one measures about 78 × 90.2 mm and carries around 88 components.
61% use four copper layers or more, and 39% carry an open source license.
The most starred is Nest mini drop in pcb by iMike78.
Parts used alongside the MPR121QR2
Microcontrollers on boards using the MPR121QR2
What boards using the MPR121QR2 are built for
MPR121QR2: common questions
Where can I find a MPR121QR2 reference design?
Each of the 23 boards on this page is a real design using the MPR121QR2. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the MPR121QR2 VREG pin connected?
The VREG pin has a capacitor to GND on 19 of 20 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 20 open source designs using the MPR121QR2.
What resistor goes on the MPR121QR2 REXT pin?
The REXT pin has a resistor to GND on 19 of 20 designs, most often 75 kΩ (then 200 kΩ). Counted from the KiCad layouts of 20 open source designs using the MPR121QR2.
What decoupling capacitors do designs use on the MPR121QR2 VDD pin?
The VDD pin has a decoupling capacitor on 18 of 20 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 20 open source designs using the MPR121QR2.
What parts are used alongside the MPR121QR2?
The USBLC6-2SC6, ESP32-S3R8, SN74LVC125APWR, TLV73333PDBVR and TPS62065DSGR appear in the most repositories here.
Which microcontrollers do boards using the MPR121QR2 use?
Most are built on ESP32 (10), Nordic nRF (3), RP2040/RP2350 (3) and AVR/Arduino (2).
How big is a typical board using the MPR121QR2?
The median is 78 × 90.2 mm, and 39% are two-layer designs.
What is the most popular open source board using the MPR121QR2?
By GitHub stars, Nest mini drop in pcb by iMike78, with 598 stars.
Can I simulate one of these boards using the MPR121QR2 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.