Opensurgbot board

lgabp1·opensurgbot_board

Opensurgbot board layout, top view — open source board by lgabp1

About the Opensurgbot board

Opensurgbot board is an open source PCB design by lgabp1, published on GitHub. It is a 2-layer board measuring 72.3 × 49.5 mm, with 50 components from 29 distinct parts.

Other key parts include the AP63205WU, LM2576HVT-5, LM2576HVT-15 and LD1117S33TR_SOT223. By type, the board carries 11 diodes, 8 connectors, 8 capacitors, 8 resistors, 6 ICs and 5 inductors.

From the project

Board design for the opensurgbot first prototype.

Board design for the opensurgbot first prototype.

The opensurgbot was temporarily named deehli, and the board design has not been updated since the name change. Thus, the kicad files and the board name still refer to deehli.

Opensurgbot board, from the project README
From the project README

Main components on the Opensurgbot board

Opensurgbot board bill of materials (BOM)

50 components, 29 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
AP63205WU
U1
2
LM2576HVT-5
U2, U3
2
LM2576HVT-15
U4, U6
1
LD1117S33TR_SOT223
U5
1
Servo_Out
J1
1
PWM_In
J2
1
Vcc_Out
J3
1
ZDT_Pins
J4
1
CAN_Ext
J5
1
BoardPWR
J6
1
ZDT_Connector
J7
1
BoardCAN
J8
1
JUMPER_120R
Jumper_120R
JP2
1
Barrel_Jack_MountingPin
PWR_IN1
1
Conn_01x02_Pin
PWR_IN2
1
SW_DPDT_X2
SW_DPDT_x2
SW1
7
LED
D1, D2, D3, D4, D5, D6, D7
4
1N5822
D8, D9, D10, D11
4
100U
100u
L1, L2, L3, L4
1
4.7U
4.7u
L5
Show 9 more
QtyPartRefs
5
Cpol 1000uF
C1, C2, C3, C6, C7
1
Cpol 100uF
C4
1
100NF
100nF
C8
1
Cpol 2x22uF
C9
3
5k
R1, R2, R3
2
15K
15k
R4, R7
1
50K
50k
R5
1
1k
R6
1
120R
R8

Opensurgbot board design files

The KiCad project lives in the lgabp1/opensurgbot_board repository on GitHub; these links point at the commit this page was built from.

Opensurgbot board: common questions

How big is the Opensurgbot board?

The Opensurgbot board measures 72.3 × 49.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Opensurgbot board?

50 components, from 29 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Opensurgbot board design files?

From the lgabp1/opensurgbot_board repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Opensurgbot board design in my own project?

The repository has no license, so all rights stay with lgabp1. Use it as a reference, and ask the author before reusing the design.