167 open source boards using the LD1117S33TR_SOT223
Real designs built with the LD1117S33TR_SOT223, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
SEthernet/30 PDS Ethernet card for Macintosh SE/30
rhalkyard
116.8 × 121.8 mm43 parts4LGPL-3.0164AVR/Arduino
MegaMIDI
AidanHockey5
100 × 100 mm102 parts2LAGPL-3.0116AVR/Arduino
Genny
superjoebob
100 × 100 mm102 parts2LNo license92STM32
Throwback Operator
AidanHockey5
80 × 57.2 mm54 parts2LNo license71Microchip SAM
MegaBlaster2
AidanHockey5
99 × 99 mm102 parts4LAGPL-3.059Radioberry LPF V1.3
pa3gsb
85 × 56 mm112 parts4LNo license24FPGA
M68k
annoyatron255
100 × 100 mm105 parts2LNo license24Microchip SAM
YM2151 Arcade Classic 2
AidanHockey5
99 × 99 mm111 parts4LAGPL-3.022ESP32
VCU
sufst
194.3 × 92.8 mm205 parts4LGPL-3.019STM32
St40
coarse
226.1 × 73.9 mm110 parts2LCC-BY-SA-4.019STM32
Iceskate
icerink
23.6 × 57.7 mm37 parts2LCERN-OHL-1.218ESP32
Esp32-c3
TadeasFrycak
45.7 × 21.3 mm32 parts2LGPL-3.017EasyRelay Board
stamina
70 × 80 mm66 parts4LGPL-3.014ESP32
Batch (4 Layer SMT)
Cyberspecies
100 × 100 mm68 parts4LNo license10Microchip SAM
USMR Engineering Board
DarmorGamz
66 × 68.6 mm55 parts4LCustom license9Ml dev board
coon42
100 × 73.2 mm53 parts2LNo license7STM32
Micropad
blakesmith
45.1 × 76.5 mm27 parts2LNo license7Voron I CAN has carrot board
christophmuellerorg
42 × 16 mm13 parts4LSHL-2.16ESP8266
Reflow Oven
La-guajolota
100 × 80 mm38 parts2LMIT5ESP32
Robotica
La-guajolota
100 × 100 mm52 parts2LMIT4ESP32
Flipdot brose
julianschick
100 × 100 mm43 parts2LMIT4STM32
2026 STM32H7 FPAA v1
gfm16617
68.6 × 53.3 mm91 parts4LNo license3STM32
Zenith-Development-Board
zenitheesc
50 × 63 mm67 parts2LMIT3ESP32
NB IoT app
JurCag
42.4 × 66.1 mm54 parts4LNo license3ESP8266
UnderControl Hardware Design
YamanSeyravan
100 × 100 mm185 parts4LGPL-3.02Shared usb memory
hnz1102
50 × 40 mm83 parts2LNo license2ESP32
Atlas-S3-DevBoard
OmkarKnkr
27.4 × 65.2 mm47 parts4LNo license2ESP32
LSW5-ESP32
mwdmwd
35 × 52 mm36 parts2LNo license2PIC
Homebrew 65c02 Computer
snorklerjoe
127.6 × 98 mm252 parts4LMIT1NXP
Modular
zevv
85 × 85 mm203 parts2LBSD-2-Clause1ESP32
Worldclockv1
orri93
193.8 × 120 mm116 parts2LMIT1ESP32
Soil metrics
Aryan-git-byte
88.3 × 112.3 mm74 parts4LMIT1ESP32
Spider Upper
ucb-bar
63 × 63 mm74 parts2LNo license1RP2040/RP2350
Flight controller atlas
williamjroche
51 × 45 mm66 parts4LMIT1ESP32
CForge
SamhithPola2025
27.7 × 54.5 mm49 parts2LMIT1STM32
STM32-Battleship
Realvideogame
20.3 × 85.1 mm46 parts4LMIT1
How designs wire the LD1117S33TR_SOT223
Read from the KiCad layouts of 117 open source designs, one per repository: what each pin of the LD1117S33TR_SOT223 connects to, and the resistors, capacitors and other passives placed on it.
- The VI pin has a decoupling capacitor on 85 of 116 designs, most often 100 nF (then 10 µF).
- The VO pin has a decoupling capacitor on 53 of 116 designs, most often 10 µF (then 100 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1 | Connected to: GND 91% | — |
| VOpin 2 | Connected to: 3.3V 88% |
|
| VIpin 3 | Connected to: 5V 80% · a signal 19% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Battery by iam4722202468, SEthernet PDS Ethernet card for Macintosh SE by rhalkyard, MegaMIDI by AidanHockey5 and Genny by superjoebob.
The LD1117S33TR_SOT223 in open source designs
The gallery holds 167 open source boards using the LD1117S33TR_SOT223 from 118 GitHub repositories; a typical one measures about 68 × 63 mm and carries around 52 components.
59% are two-layer designs, the rest use four layers or more, and 26% carry an open source license.
The most starred is Battery by iam4722202468.
Parts used alongside the LD1117S33TR_SOT223
Microcontrollers on boards using the LD1117S33TR_SOT223
What boards using the LD1117S33TR_SOT223 are built for
LD1117S33TR_SOT223: common questions
Where can I find a LD1117S33TR_SOT223 reference design?
Each of the 167 boards on this page is a real design using the LD1117S33TR_SOT223. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the LD1117S33TR_SOT223 VI pin?
The VI pin has a decoupling capacitor on 85 of 116 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 117 open source designs using the LD1117S33TR_SOT223.
What decoupling capacitors do designs use on the LD1117S33TR_SOT223 VO pin?
The VO pin has a decoupling capacitor on 53 of 116 designs, most often 10 µF (then 100 nF). Counted from the KiCad layouts of 117 open source designs using the LD1117S33TR_SOT223.
What parts are used alongside the LD1117S33TR_SOT223?
The LD1117S50TR_SOT223, USBLC6-2SC6, ESP32-S3-WROOM-1, L7805 and STM32F091RCTx appear in the most repositories here.
Which microcontrollers do boards using the LD1117S33TR_SOT223 use?
Most are built on STM32 (45), ESP32 (42), RP2040/RP2350 (11) and AVR/Arduino (7).
How big is a typical board using the LD1117S33TR_SOT223?
The median is 68 × 63 mm, and 59% are two-layer designs.
What is the most popular open source board using the LD1117S33TR_SOT223?
By GitHub stars, Battery by iam4722202468, with 303 stars.
Can I simulate one of these boards using the LD1117S33TR_SOT223 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.