DataAcq-Receiver
lhr-solar·DataAcq-Receiver
About the DataAcq-Receiver PCB
DataAcq-Receiver is an open source PCB design by lhr-solar, published on GitHub. It is a 4-layer board measuring 22.8 × 36.5 mm, with 37 components from 20 distinct parts.
Other key parts include the TLV70130DBVR, USBLC6-2SC6 and FT234XD-R. By type, the board carries 14 resistors, 10 capacitors, 4 connectors, 3 ICs, 3 diodes and 2 switches.
From the project
��# DataAcq-Receiver
Main components on the DataAcq-Receiver
DataAcq-Receiver bill of materials (BOM)
37 components, 20 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TLV70130DBVR | DBV5 | U1 |
| 1 | USBLC6-2SC6 | SOT-23-6 | U2 |
| 1 | FT234XD-R | SON45P300X300X80-13N | U3 |
| 1 | DIGIXBEERX900MICRO DigiXBeeRX900Micro | XBeeXR900RFMicro | X1 |
| 1 | 538-105444-0001 MOLEX 1054440001 | MOLEX_1054440001 | J1 |
| 1 | CONN_01X03 Conn_01x02 | PinHeader_1x02_P2.00mm_Vertical_SMD_Pin1Left | J2 |
| 1 | Conn_01x02 | PinHeader_1x02_P2.00mm_Vertical_SMD_Pin1Left | J3 |
| 1 | Conn_01x03 | PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | 611-KMS231GLFS RF_RESET | SW_SPST_CK_KMS2xxGP | SW1 |
| 1 | 611-KMS231GLFS RF_SLEEP | SW_SPST_CK_KMS2xxGP | SW2 |
| 3 | LED | LED_0805_2012Metric | D7, D8, D9 |
| 1 | 100NF 100nF | C_0805_2012Metric | C2 |
| 3 | 47PF 47pF | C_0805_2012Metric | C5, C12, C13 |
| 3 | 1UF 1uF | C_0805_2012Metric | C6, C10, C11 |
| 1 | 10UF 10uF | C_0805_2012Metric | C7 |
| 2 | 1UF 1u | C_0805_2012Metric | C8, C9 |
| 1 | 5.1K | R_0805_2012Metric | R4 |
| 5 | 1k | R_0805_2012Metric | R7, R13, R15, R16, R18 |
| 6 | 10K 10k | R_0805_2012Metric | R8, R9, R10, R11, R12, R17 |
| 2 | 27 | R_0805_2012Metric | R14, R19 |
DataAcq-Receiver design files
The KiCad project lives in the lhr-solar/DataAcq-Receiver repository on GitHub; these links point at the commit this page was built from.
- LayoutrfReciever.kicad_pcb
- SchematicrfReciever.kicad_sch
- BOMBOM/bom.csv
DataAcq-Receiver: common questions
How big is the DataAcq-Receiver PCB?
The DataAcq-Receiver measures 22.8 × 36.5 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the DataAcq-Receiver?
37 components, from 20 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the DataAcq-Receiver design files?
From the lhr-solar/DataAcq-Receiver repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the DataAcq-Receiver design in my own project?
The repository has no license, so all rights stay with lhr-solar. Use it as a reference, and ask the author before reusing the design.