Mediapad
lixtheyt·mediapad·PCB/Hackpad.kicad_pcb
About the Mediapad PCB
Mediapad is an open source PCB design by lixtheyt, published on GitHub under the MIT license. It is a 2-layer board measuring 100 × 100 mm, with 40 components from 6 distinct parts.
Other key parts include the MOUDLE-SEEEDUINO-XIAO. By type, the board carries 29 diodes, 9 switches, 1 IC and 1 connector.
It belongs with the displays & leds, keyboards and wearables designs in this gallery.
From the project
Mediapad is a HackPad project made by Hack Club. Mediapad was created because of the Stardance project as a HackPad mission.
Mediapad is an 9 key hackpad with a rotary encoder, an OLED Display. It also has 20/16 SK6812 MINI-E LEDs, and uses QMK firmware.
Watch it here if the player above does not load.
It has 8 separate printed pieces. 3 are parts of the case, 1 is a spacer for the glow and 1 is for the OLED display as a support.
The board exists in two LED populations, so the firmware ships as two revisions. They differ only in the LED map keys, encoder and OLED are shared.

Main components on the Mediapad
Mediapad bill of materials (BOM)
40 components, 6 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MOUDLE-SEEEDUINO-XIAO | XIAO-Generic-Hybrid-14P-2.54-21X17.8MM | U1 |
| 1 | CONN_01X04 Conn_01x04 | SSD1306-0.91-OLED-4pin-128x32 | J1 |
| 8 | SW_Push | SW_Cherry_MX_1.00u_PCB | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 |
| 1 | RotaryEncoder_Switch | RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW9 |
| 20 | SK6812MINI-E | SK6812MINI-E_fixed | D1, D2, D3, D4, D5, D6, D7, D8 +12 |
| 9 | 1N4148 | D_DO-35_SOD27_P7.62mm_Horizontal | D21, D22, D23, D24, D25, D26, D27, D28 +1 |
Mediapad design files
The KiCad project lives in the lixtheyt/mediapad repository on GitHub; these links point at the commit this page was built from.
- LayoutPCB/Hackpad.kicad_pcb
- SchematicPCB/Hackpad.kicad_sch
- BOMPCB/BOM.csv
Mediapad: common questions
How big is the Mediapad PCB?
The Mediapad measures 100 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Mediapad?
40 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Mediapad design files?
From the lixtheyt/mediapad repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Mediapad design in my own project?
Yes, under the terms of its MIT license, which lixtheyt chose for the repository.
Similar boards
View base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kBM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kAnyon e motherboard
byrantech
133 × 92 mm258 parts6LMIT4.3kSwitch
byrantech
18.5 × 11.1 mm5 parts2LMIT4.3k