LT3042 breakout
About the LT3042 breakout
LT3042 breakout is an open source PCB design by ljufa, published on GitHub under the MIT license. It is a 2-layer board measuring 10.2 × 14.6 mm, with 7 components from 5 distinct parts.
Other key parts include the LT3042EMSE. By type, the board carries 3 capacitors, 2 resistors, 1 IC and 1 connector.
It belongs with the displays & leds, dev boards & breakouts and audio designs in this gallery.
From the project
kicad files for rsplayer music player hardware
This repository contains the hardware design files for the RSPlayer project, a high-quality audio player. The designs are created in KiCad.
This hardware design prioritizes modularity and DIY-friendliness. The goal is to provide a flexible platform where enthusiasts can easily swap components, upgrade specific subsystems (like power regulators or output stages), and experiment with different configurations. This open architecture encourages users to tweak the design, test new ideas, and continuously improve the audio performance to match their personal preferences.
Main components on the LT3042 breakout
LT3042 breakout bill of materials (BOM)
7 components, 5 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LT3042EMSE | MSOP-10-1EP_3x3mm_P0.5mm_EP1.68x1.88mm_ThermalVias | U1 |
| 1 | CONN_01X03 | PinHeader_1x03_P2.54mm_Horizontal | J1 |
| 3 | 10u | C_0603_1608Metric | C1, C2, C3 |
| 1 | 33.2K | R_0603_1608Metric | R1 |
| 1 | 300 | R_0603_1608Metric | R2 |
LT3042 breakout design files
The KiCad project lives in the ljufa/rsplayer_hardware repository on GitHub; these links point at the commit this page was built from.
LT3042 breakout: common questions
How big is the LT3042 breakout?
The LT3042 breakout measures 10.2 × 14.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the LT3042 breakout?
7 components, from 5 distinct parts. The full bill of materials is listed on this page.
Where can I download the LT3042 breakout design files?
From the ljufa/rsplayer_hardware repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the LT3042 breakout design in my own project?
Yes, under the terms of its MIT license, which ljufa chose for the repository.
More boards in rsplayer_hardware
Similar boards
LevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2k
View base
81.2 × 81.2 mm81 parts2LApache-2.022.2k
View screen
35 × 35 mm12 parts2LApache-2.022.2k
BM28B0.6-24DSBreakout
15.2 × 35.6 mm3 parts2LApache-2.022.2k
ChainlinkDriverTester
198.1 × 95.3 mm123 parts2LApache-2.04.2k
ChainlinkBase
98.4 × 190.5 mm119 parts2LApache-2.04.2k