Hzbugger

llatva·hzbugger

Hzbugger PCB layout, top view — open source STM32 board by llatva

About the Hzbugger PCB

Hzbugger is an open source STM32 PCB design by llatva, published on GitHub under the CERN-OHL-S-2.0 license. It is a 2-layer board measuring 54.5 × 31.2 mm, with 57 components from 27 distinct parts.

Its main chip is the STM32F103C8T6, from the STM32 family. Other key parts include the SRV05-4, AMS1117-3.3 and HX AM 90D. By type, the board carries 23 resistors, 15 capacitors, 8 diodes, 4 ICs, 3 connectors and 2 switches.

It belongs with the usb & debug tools designs in this gallery.

From the project

Hzbugger, a Black Magic Probe compatible SWD/debugger tool

Hzbugger is an STM32F103C8T6-based Black Magic Probe compatible debugger by Lasse OH3HZB.

Bottom side silkscreen created using AI tools (intended for black PCB as in pictures below).

Basic functionality works out-of-box with BMP bluepill image. Extra LEDs and AUX header requires fw customization. See BlackMagic Probe adaptation guide for firmware-porting and usage details.

Hzbugger, from the project README
From the project README

Main components on the Hzbugger

Hzbugger bill of materials (BOM)

57 components, 27 distinct parts.

QtyPartRefs
1
STM32F103C8T6
U1
1
SRV05-4
U2
1
AMS1117-3.3
U3
1
HX AM 90D
U4
1
8M
Y1
1
SELF_SWD
J1
1
IDC
J2
1
GPIO
J6
1
1A
F1
1
RESET_SW
SW1
1
BOOT0_SW
SW2
1
PWR_LED
D1
1
SS14
D2
3
LED1
D3, D5, D7
1
LED2
D4
1
ERR_LED
D6
1
ACT_LED
D8
10
100n
C2, C3, C5, C7, C9, C10, C14, C15 +2
2
10u
C4, C6
1
100u
C8
Show 7 more
QtyPartRefs
2
22p
C11, C12
10
22R
R1, R2, R9, R10, R14, R15, R16, R17 +2
6
1k5
R3, R13, R18, R19, R20, R21
2
22R
R4, R5
1
1k5
R6
3
10k
R7, R8, R12
1
1k5
R11

Hzbugger design files

The KiCad project lives in the llatva/hzbugger repository on GitHub; these links point at the commit this page was built from.

Hzbugger: common questions

What microcontroller does the Hzbugger use?

The Hzbugger is built around the STM32F103C8T6, from the STM32 family.

How big is the Hzbugger PCB?

The Hzbugger measures 54.5 × 31.2 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Hzbugger?

57 components, from 27 distinct parts. The full bill of materials is listed on this page.

Where can I download the Hzbugger design files?

From the llatva/hzbugger repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Hzbugger design in my own project?

Yes, under the terms of its CERN-OHL-S-2.0 license, which llatva chose for the repository.

Can I test firmware for the Hzbugger without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards