FILAMENT EXTRUDER
lokeshtekade77-source·FILAMENT_EXTRUDER·PCB_KiCad/ExtruderController/ExtruderController.kicad_pcb
About the FILAMENT EXTRUDER PCB
FILAMENT EXTRUDER is an open source PCB design by lokeshtekade77-source, published on GitHub. It is a 2-layer board measuring 100 × 80 mm, with 13 components from 13 distinct parts.
By type, the board carries 6 connectors, 4 resistors, 2 capacitors and 1 diode.
It belongs with the iot & wireless and sensors designs in this gallery.
From the project
A comprehensive, production-grade industrial control suite for plastic filament extruders. This repository provides complete firmware, circuit schematics, PCB designs, simulation guides, and real-time data logging software across two flexible architectures:
A comprehensive, production-grade industrial control suite for plastic filament extruders. This repository provides complete firmware, circuit schematics, PCB designs, simulation guides, and real-time data logging software across two flexible architectures:
1. Flagship Standalone Controller (Arduino Mega 2560 + 3.5" TFT): Direct multi-zone heating via 4-channel relay modules, 4 band heaters, dual PT100 RTD sensors, motor screw control, safety interlocks, and real-time CSV telemetry. 2. Dual-MCU IoT Distributed Controller (Arduino TFT + ESP32 / ESP8266 Web Dashboard): Bidirectional Hardware…
FILAMENT EXTRUDER bill of materials (BOM)
13 components, 13 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | DS18B20 | TerminalBlock_Phoenix_MKDS-1,5-3-5.08_1x03_P5.08mm_Horizontal | J1 |
| 1 | SSR_Z1 | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J2 |
| 1 | SSR_Z2 | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J3 |
| 1 | SSR_Z3 | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J4 |
| 1 | MOTOR_CTRL | TerminalBlock_Phoenix_MKDS-1,5-3-5.08_1x03_P5.08mm_Horizontal | J5 |
| 1 | DC_5V_IN | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J6 |
| 1 | PWR_LED | LED_D5.0mm | D1 |
| 1 | 100nF | C_Disc_D5.0mm_W2.5mm_P5.00mm | C1 |
| 1 | 10uF | CP_Radial_D5.0mm_P2.50mm | C2 |
| 1 | 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | 2k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
| 1 | 4.7k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3 |
| 1 | 330 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R4 |
FILAMENT EXTRUDER design files
The KiCad project lives in the lokeshtekade77-source/FILAMENT_EXTRUDER repository on GitHub; these links point at the commit this page was built from.
FILAMENT EXTRUDER: common questions
How big is the FILAMENT EXTRUDER PCB?
The FILAMENT EXTRUDER measures 100 × 80 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the FILAMENT EXTRUDER?
13 components, from 13 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the FILAMENT EXTRUDER design files?
From the lokeshtekade77-source/FILAMENT_EXTRUDER repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the FILAMENT EXTRUDER design in my own project?
The repository has no license, so all rights stay with lokeshtekade77-source. Use it as a reference, and ask the author before reusing the design.
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kEinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kRPi RM0 WiFi/Bluetooth Module
schlae
11.1 × 14 mm76 parts6LNo license1.0k