SOIC-28-to-DIP
About the SOIC-28-to-DIP PCB
SOIC-28-to-DIP is an open source PCB design by lolakkalol, published on GitHub. It is a 2-layer board measuring 22 × 37 mm, with 3 components from 2 distinct parts.
Other key parts include the SOIC-28. By type, the board carries 2 connectors and 1 IC.
It belongs with the retro computing designs in this gallery.
From the project
This project started thanks to Ben Eater's video series on his 6502-based computer, which is the basis for my project and learning experience. The project has a very simple goal of me learning low-level embedded system development on hardware and software. To achieve this learnin
This project started thanks to Ben Eater's video series on his 6502-based computer, which is the basis for my project and learning experience. The project has a very simple goal of me learning low-level embedded system development on hardware and software. To achieve this learning goal, a few project goals/milestones have been set up to steer the project in a satisfactory direction. The computer should also not be a carbon copy of Ben Eater's computer to promote self-learning and delving into documentation and learning by doing. I believe you remember things better when you fail at something…
Main components on the SOIC-28-to-DIP
SOIC-28-to-DIP bill of materials (BOM)
3 components, 2 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SOIC-28 | SOIC-28W_7.5x18.7mm_P1.27mm | U1 |
| 2 | Conn_01x14_Pin | PinHeader_1x14_P2.54mm_Vertical | J1, J2 |
SOIC-28-to-DIP design files
The KiCad project lives in the lolakkalol/6502-computer-project repository on GitHub; these links point at the commit this page was built from.
SOIC-28-to-DIP: common questions
How big is the SOIC-28-to-DIP PCB?
The SOIC-28-to-DIP measures 22 × 37 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the SOIC-28-to-DIP?
3 components, from 2 distinct parts. The full bill of materials is listed on this page.
Where can I download the SOIC-28-to-DIP design files?
From the lolakkalol/6502-computer-project repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the SOIC-28-to-DIP design in my own project?
The repository has no license, so all rights stay with lolakkalol. Use it as a reference, and ask the author before reusing the design.
More boards in 6502-computer-project
Similar boards
Expansion Card Retrofit
FrameworkComputer
24 × 27.3 mm5 parts2LCC-BY-4.01.1k
Videoslotadapter
hoglet67
152 × 57.6 mm13 parts2LGPL-3.01.0k
Amiga External
21.9 × 76.7 mm6 parts2LGPL-3.01.0k
Buffer
53.9 × 23.2 mm13 parts2LGPL-3.01.0k
X1
121.9 × 81.3 mm51 parts2LGPL-3.01.0k
Rgb to hdmi
77 × 97 mm67 parts2LGPL-3.01.0k