Front Panel
lonesoulsurfer·Thingtendo-Game-and-Watch-Clone·Kicad_Panel_Design/Kicad_Front Panel/Kicad_Front_Panel/Front Panel.kicad_pcb
About the Front Panel PCB
Front Panel is an open source PCB design by lonesoulsurfer, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 120 × 55 mm, with 9 components from 9 distinct parts.
By type, the board carries 8 switches and 1 connector.
It belongs with the audio, power & battery and wearables designs in this gallery.
From the project
ESP32-S3 handheld that plays classic Game & Watch games. 2.4" colour screen, D-pad, speaker and battery.
A handheld that plays classic Nintendo Game & Watch games on an ESP32-S3, with a 2.4" colour screen, a D-pad, speaker and rechargeable battery.
This is a fork of slowlane112/Esp32-Game-and-Watch. All credit for the original firmware, emulator integration and hardware designs goes to that project. This fork adds a new hardware model, singlescreendpad, plus a few extra features.

Front Panel bill of materials (BOM)
9 components, 9 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Conn_01x09_Pin | PinHeader_1x09_P2.54mm_Vertical | J6 |
| 1 | left | SW_SKRGAED010 | SW1 |
| 1 | right | SW_SKRGAED010 | SW2 |
| 1 | up | SW_SKRGAED010 | SW3 |
| 1 | down | SW_SKRGAED010 | SW4 |
| 1 | jump | SW_SKRGAED010 | SW5 |
| 1 | B | SW_Tactile_3x6x2.5 | SW6 |
| 1 | time | SW_Tactile_3x6x2.5 | SW7 |
| 1 | A | SW_Tactile_3x6x2.5 | SW10 |
Front Panel design files
The KiCad project lives in the lonesoulsurfer/Thingtendo-Game-and-Watch-Clone repository on GitHub; these links point at the commit this page was built from.
Front Panel: common questions
How big is the Front Panel PCB?
The Front Panel measures 120 × 55 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Front Panel?
9 components, from 9 distinct parts. The full bill of materials is listed on this page.
Where can I download the Front Panel design files?
From the lonesoulsurfer/Thingtendo-Game-and-Watch-Clone repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Front Panel design in my own project?
Yes, under the terms of its GPL-3.0 license, which lonesoulsurfer chose for the repository.
More boards in Thingtendo-Game-and-Watch-Clone
Similar boards
BM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kView base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kChainlinkDriver
scottbez1
198.1 × 30.5 mm58 parts2LApache-2.04.2kChainlinkDriverTester
scottbez1
198.1 × 95.3 mm123 parts2LApache-2.04.2k